512488
20
Zoom out
Zoom in
Vorherige Seite
1/261
Nächste Seite
20 | English
F 016 L70 585 | (10.11.09) Bosch Power Tools
For products not sold in GB:
WARNING: For your safety, it is required that
the plug attached to the machine is connected
with the extension cord. The coupling of the ex-
tension cord must be protected against splash
water, be made of rubber or coated with rubber.
The extension cord must be used with a cable
strain relief.
The connection lead must be inspected for signs
of damage at regular intervals and may only be
used if in perfect conditions.
If the supply cord is damaged, it must be re-
placed by a Bosch Service Centre.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Assembly
f Ensure the cables are not trapped when
folding/unfolding top/bottom handles. Do
not drop the handles.
Handle assembly (see figure A)
Note: The handle top 3 is height adjustable. Fix
handles in desired position I or II.
Attach cable to cable restraint 11 ensuring that
sufficient cable slack is available. (non GB mod-
els) (see figure B)
Note: Ensure that the cable clip supplied is used
to fix the cable to the handle.
Snap together the grassbox (see figure C)
Snap the grassbox top on the grassbox bottom
by pushing all the “snap fits” together around
the edges starting at rear and working towards
the front.
Grassbox fitting/removing (see figure D)
Lift the deflector guard 5 and hold up, fit or re-
move the grassbox 10.
For non grass collection the mower can be used
without the grassbox 10 in position, with the de-
flector guard 5 in the down position.
Adjusting the Cutting Height (see figure F)
f Stop, release switch lever and wait until the
motor stops before adjusting height. The
blades continue to rotate after the machine
is switched off, a rotating blade can cause in-
jury.
f Caution do not touch the rotating blade.
For the first cutting of the season, a high cutting
height should be selected.
Your garden product has 3 settings that result to
the following cutting heights:
Remove the grassbox 10 to aid adjustment.
Make sure that all wheels 9 are set to the same
cutting height.
no Insert the handle bottom 6 into the holes
provided and secure with the screws.
p Attach the handle top 3 with the bolts and
wing nuts 4 to the handle bottom 6.
I20mm
II 40 mm
III 60 mm
n Lift the garden product and pull/push the
wheel 9 to the front of the garden product
using the hand position on the wheel.
o Raise/lower the wheel 9.
p Allow wheel 9 to locate in desired posi-
tion.
OBJ_BUCH-1068-001.book Page 20 Tuesday, November 10, 2009 9:41 AM
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bosch-rotak-32

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch Rotak 32 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info