en
10
Filling with rinse aid
Rinse aid is used in washing mode to
ensure that glasses are sparkling and
utensils are stain-free.
When the appliance is switched on, low
rinse aid level is indicated by ”Refill rinse
aid”. You can add rinse aid either when the
appliance door is completely open or – for
a more comfortable posture – when the
door is half open.
Open the rinse aid dispenser 30 by
pressing the button on the dispenser
cover and open the cover. When the
door is half open, also pull out the
hinged filling aid until it locks into
position.
Fill in the rinse aid slowly and take care
not to overfill. The right amount is
indicated by the level indicator at the
compartment not being illuminated
when the door is fully opened and by
the display “Refill Rinse Aid” no longer
being lit.
Close the lid of the compartment until it
audibly clicks into place. If necessary,
the filling aid will be re-inserted
automatically.
If you want to fill in the rinse aid at a later
time you can skip the display “Refill Rinse
Aid” by pressing the button M/OK
2 .
If necessary, you can change the amount
of rinse aid that is added during the
operation. In order to do this, select the
option “Rinse Aid Amount” as described
in the chapter “Device Set-up” under
the heading “Options/Basic Settings”.
rinse–aid control
Fill when door is fully open.
Filling when the door is half open.
Note
Use only rinse aid for domestic
dishwashers. Spilt rinse aid may result in
excessive foam formation in the next rinse
cycle. Therefore, remove any spilt rinse
aid with a cloth.
