Bedienungsanleitung Bosch Smartphone Grip BSP3200 - 2022 (Seite 10 von 51) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

780119

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

English – 2

SmartphoneGrip

Inductive charging capacity W 7.5W (1.5A at 5V)

Efficiency > 67%

Operating temperature °C –5 to 40

Storage temperature °C 10 to 40

Protection rating IP54

Weight, approx. g 75

Assembly

SmartphoneGrip Assembly (seefigureA)

Press and hold the release mechanism(4) to position the

SmartphoneGrip. Place the upper edge of the Smart-

phoneGrip next to the snap-in hook(6) of the display

holder(5)➊. Pull the SmartphoneGrip towards you and

push the SmartphoneGrip onto the display holder➋. Let go

of the release mechanism(4).

Press the release mechanism(4) while pulling it towards

you➊ to remove the SmartphoneGrip. Remove the Smart-

phoneGrip and let go of the release mechanism(4)➋.

Inserting the Removal Blocker (seefigureB)

Insert the removal blocker(12) into the adapter tray(16)

from below until you hear the removal blocker(12) click into

place.

Together with the keypad lock(13), this prevents the Smart-

phoneGrip from being quickly and easily removed.

Note: The removal blocker(12) is not an anti-theft device.

To remove the removal blocker(12), loosen the two fasten-

ing screws(11).

Smartphone Assembly (seefigureC)

The SmartphoneGrip can hold smartphones in the following

sizes:

67–88 mm

6,8–13 mm

123–175 mm

The specified dimensions include any phone cases. Smart-

phones with folio and carrying cases must not be used.

The total weight must not exceed 276g.

Insert your smartphone(15) with the long side of the phone

positioned at the centre against the movable retaining

bracket(1). Press the smartphone(15) against the movable

retaining bracket(1) with both hands ➊ and place your

smartphone(15) in the SmartphoneGrip ➋.

uBe careful not to pinch your fingers between the movable

retaining bracket and the SmartphoneGrip when inserting

your smartphone.

Once you have inserted your smartphone, check that the

smartphone cannot come into contact with any hard parts on

the bike even in case of vibrations, as this could cause last-

ing damage to the smartphone.

Keypad Lock Assembly (seefigureD)

The keypad lock(13) supplied, together with the removal

blocker(12), prevents the SmartphoneGrip from being

quickly and easily removed by blocking the release mechan-

ism(4).

To insert the keypad lock(13), slide the keypad lock(13)

into the provided opening ➊ and carefully screw it into place

with a hex key (1.5mm)(14) ➋.

Note: The keypad lock is not an anti-theft device. The

keypad lock prevents the SmartphoneGrip from being

quickly removed from the holder. The keypad lock does not

affect the smartphone in any way.

Note: Never leave your smartphone unattended in the

SmartphoneGrip.

To remove the keypad lock(13), unscrew the securing

screw with a hex key (1.5mm)(14)and remove the keypad

lock(13).

Operation

Starting Operation

Place your smartphone in the SmartphoneGrip.

Start theeBike Flow app to have riding data displayed.

Depending on the smartphone's operating sys-

tem, theeBike Flow app can be downloaded

free of charge from the Apple App Store and

the Google Play store.

Use your smartphone to scan the code in order to download

theeBike Flow app.

Charging your Smartphone

While the smartphone is in the SmartphoneGrip, it can be

charged at the same time as displaying riding data. If your

smartphone has an inductive charging function, you can

charge the smartphone without needing a cable.

Inductive Charging

The charging process starts automatically when you place a

smartphone with an inductive charging function in the

SmartphoneGrip. The status LED(9) lights up yellow. When

the smartphone is fully charged, the status LED(9) will light

up green permanently.

0 275 008 3SG | (28.02.2022) Bosch eBike Systems

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Smartphone Grip BSP3200 - 2022 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info