Bedienungsanleitung Bosch Spexor (Seite 5 von 9) (Englisch)

794392

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

English | 26

Commissioning

▷Fully charge spexor before using it for the ﬁrst time.

This can take up to 8 hours depending on the ambient

conditions.

Launching the app

▷Start the app.

▷Log in with your e-mail address and password.

If you have forgotten your password, you can reset it in

the app.

▷You can now use the app to operate and conﬁgure spexor.

English | 27

Commissioning

Adding alarm devices

You can also control multiple alarm devices with your smart-

phone. There is no limit to how many. You can add more

alarm devices in the app. To do this, the alarm device to be

added must be turned on and the app must be running.

▷Scan the QR code contained in the Quick Start Guide

delivered with the alarm device to be added. If you do

not want to authorize access to your camera, you can

also manually enter the 8-digit device number of your

QRcode.

▷Safely store the Quick Start Guide with QR code so it can

be used later.

English | 28

The spexor app is the communication interface for your

alarm device. You can use it to monitor diﬀerent states of the

alarm device everywhere, such as the battery charge.

You can also manage your user account information,

activate or deactivate monitoring or the alarm function, add

more alarm devices, use help topics, or book additional

features or services later.

Operation

English | 29

Monitoring

Placing it where you want to monitor

– Note –

Risk of damage! The alarm device is not protected

against moisture and water. Penetrating water or

moisture can damage or destroy the alarm device.

Keep the alarm device away from water or other liquids.

– Note –

Exposure to ﬁre and heat! Excessive heat can damage

the battery or sensors. Protect the alarm device from heat

and keep it away from heat sources such as radiators or

stoves and from open ﬂames.

English | 24

Commissioning

▷Load the app on any other smartphone and use the same

access data during installation.

Switching on alarm device

In its as-delivered condition, spexor is switched oﬀ and its

battery may be severely discharged.

▷Switch on spexor at its ON/OFF switch.

The battery needs a minimum charge for this. If the

battery charge is too low, spexor is automatically

switched on when the charging process begins.

An acoustic signal conﬁrms the switch-on. After switching

on, the LEDs light up white brieﬂy. While spexor boots up,

they light up green six times.

English | 25

Commissioning

Charging the battery

– Note –

Charge the battery of the alarm device only with the

charger supplied by the manufacturer. If a charger

designed for a particular type of battery is used with other

batteries, then there is a risk of ﬁre.

During charging, the ambient temperature should be

between 0 °C and +40 °C.

▷Use the USB cable to connect the Micro-USB port of

spexor to the power supply unit.

▷Connect the power supply unit to the mains power.

The LEDs ﬂash white three times sequentially around the

LED array bar thereby indicating the power supply unit has

been detected and the charging process has begun.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Spexor Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch Spexor

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info