en
15
* depending on model
Additional options can be set with the
buttons @.
Ÿ Express Wash/ Speed
Perfect *
The >>Express Wash/ Speed Perfect<<
function can reduce the running time by
approx. 20% to 50% depending on the
selected rinse programme. To obtain
optimum cleaning and drying results at a
reduced running time, water and energy
consumption are increased.
§ Half load *
If you have only a few items to wash (e.g.
glasses, cups, plates), you can switch to
“half load”. This will save water, energy
and time. It is recommended to put a little
less detergent in the detergent dispenser
than for a full load.
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. This data refers to normal
conditions and the water hardness set
value 2. Different influencing factors such
as water temperature or mains pressure
may result in deviations.
Switching on the appliance
– Turn on the tap fully.
– Close the door.
– Rotate programme selector 8
to the required programme.
–Switchonthemain switch (.
The programme sequence display P
is lit.
– The programme starts running.
End of programme
The programme has ended
when the programme cycle display P
has gone out and the programme end
display X lights up.
Several minutes after
the end of the programme:
– Switch off the main switch (.
– Open the appliance door.
– After letting the device cool down take
out the dishes.
– Close the door.
Switching off the appliance
Short time after the end of the programme:
– Switch off the main switch (.
– Open the door.
– Turn off the tap (not applicable if Aqua-
Stop fitted).
– Remove the utensils when they have
cooled down.
Additional options Washing the dishes
