004 TDA26..GB/07/12
Customer Service
Great Britain
Bosch Customer Service
Grand Union House
Old Wolverton Road
Milton Keynes
MK12 5PT
UK +44 (0)844 892 8923
IRL +353 (0)1450 2655
www.bosch-home.co.uk
Operating instructions
Solving Minor Problems Yourself
Problem Possible Causes Solution
The iron does
not work or is not
heating up.
Temperature control (I)
on a very low setting. Turn the temperature control to
the desired position.
Connection problems. Check that the plug is inserted
into the mains socket correctly.
The clothes tend
to stick. Temperature control (I)
setting is too high. Turn the temperature control to
a lower setting.
Water comes out
of the soleplate
together with
steam.
Temperature control (I)
setting is too low. Turn the temperature control to
a higher setting.
Steam regulator (A)
is set too high in
conjunction with a low
temperature.
Turn the steam regulator to a
lower setting.
You have pressed the
shot of steam button
(L) repeatedly wihhout
waiting for 5 seconds
between each press.
Wait 5 seconds between each
press of the shot of steam
button.
Ta
wa
(s
ta
pr
wa
to
Mix distilled water with tap
water as directed in the „Filling
the water tank“ section, and
never add any other products
to the water tank.
Iron is not
steaming.
Steam regulator (A) in
“0” or “calc” position. Turn the steam regulator to “1”
or “2” position.
No water in tank. Fill the tank.
Scale obstruction of
internal components.
Remove the steam regulator
(A) and clean it. If this does not
help contact an Authorised
Technical Service Centre.
Spray does not
work.
No water in the tank. Add water to the water tank.
Obstructed mechanism. Contact an Authorised
Technical Service Centre.
Water comes
out from the
soleplate before
plugging the
iron in.
The steam regulator (A)
is not properly closed. Place the steam regulator in the
“0” position.
Deposits come
out through
the holes in the
soleplate.
Traces of lime scale are
coming out of the steam
chamber.
Carry out a cleaning cycle “(see
“Multiple de-scaling system”
section)
The iron begins
to smoke when
switched on.
During first use: Certain
components on the
appliance have been
lightly greased at
the factory and may
produce a little smoke
when initially heated.
This is completely normal and
will stop after a short while.
Flashing lamp on
top of handle (*) Auto-shut off has been
activated.
Move the iron gently fromside
to side to re-start it.
The lamp will then flash once
before it re-heats.
calc
TDA 26..
sensixx B1
(*) Model dependent
You can download this manual from the local homepages of Bosch
Thank you
lightweight design and is built to perform.
Th
of
Ple
or to register your product, just follow the link to the Online
guarantee registration.
Before using the Iron for the first time
Please carry out the following steps:
1. Remove
2. While the
set the temperature
(H).
3. Plug the
corr
(A) to the “2” position.
4. Ho
(L).
and smell – this is normal and will cease after a short while.
5. If
Cleaning and Maintenance
! Attention! Risk of burns!
For general cleaning, follow the information below:
Problem Solution
Dirty/lightly marked iron
body or soleplate
Clean the body of iron or soleplate with a
damp cloth then dry it..
Mark develops on
soleplate during use
Set the iron to its maximum temperature
setting. Rub the iron a few times over with
a dry cotton cloth folded several times.
Heavily stained soleplate
While the iron is cold, iron a linen cloth
soaked in white vinegar. Then dampen a
cloth with water and wipe the soleplate
clean and dry thoroughly.
DO or tank cleaning or
solvents,
function.
DO NOT
DO
any
do not allow it to come into contact with metal objects.
GUARANTEE TERMS
The
stated
of can the the
app
making
right to make technical modifications.
Environmental Care
This
sustainable development; analysing its whole lifecycle, from material
selection to its later reuse or recycling; evaluating the improvement
possibilities
Before throwing
inoperable
accordance with current laws and regulations.
Your retailer, town council or local council can give you detailed
information about these.
This appliance is labelled in accordance with
European Directive 2002/96/EG concerning used
electrical and electronic appliances (waste electrical
and electronic equipment – WEEE).
The
ret
thr
Important
This iron has been designed according to ecological criteria,
related to the sustainable development; analyzing its whole
lifecycle, from
evaluating the improvement possibilities, from a technical,
economical and environmental point of view.
This
and must not be used for industrial purposes.
Care
and safeguard them for future reference.
General safety instructions
• iron must not left unattended while is
connected to the supply mains.
•
appliance with water before pouring out
remaining water after use.
•
surface.
•
on which the stand is placed is stable.
•
if there
wa
Service Centre before it can be used again.
•
work or repair the appliance may e.g.
replacing a
out by qualified from an Authorised
Technical Service Centre.
•
year
sensory or mental capabilities or lack of experience
and
instruction
way and
shall not
maintenance shall not be made
supervision.
•
than
down.
• This
information stated on its characteristics plate.
• Th a m be con t a ear s I it is
absolutely
suitable for 16A and has a socket with an earth connection.
• If
rendered
have to be taken to an authorised Technical Service Centre.
• In
like
recommended
with Ω
the
interface point.
• The
water tank.
• Unplug
is suspected.
• The
the cable.
• Never immerse the iron in water or any other fluid.
• Do not leave the
frost, etc.)
