005 TDA56..GB ECO/09/12
Customer Service
Great Britain
Bosch Customer Service
Grand Union House
Old Wolverton Road
Milton Keynes
MK12 5PT
UK +44 (0)844 892 8923
IRL +353 (0)1450 2655
www.bosch-home.co.uk
Operating instructions
Solving Minor Problems Yourself
Thank you for buying the TDA56 eco steam iron from Bosch.
These
features
Please visit www.bosch-home.co.uk for more product
information or to register your product, just follow the
link to the Online guarantee registration.
Important
Thi
use
Carefully read through the operating instructions for the
appliance and safeguard them for future reference.
General safety instructions
• iron must not be left unattended while it is
connected to the supply mains.
•
appliance with water or before pouring out the
remaining water after use.
•
surface.
•
on which the stand is placed is stable.
•
if
wate
Service Centre before it can be used again.
•
work or repair that the appliance may need, e.g.
replacing a
out by qualified personnel from an Authorised
Technical Service Centre.
•
years
sensory
and
instruction
way and
shall not play
maintenance
supervision.
•
than
down.
•
Surface is liable to get hot during use.
Environmental Care
This
related to the sustainable development, analyzing its whole
lifecycle
- evaluating the improvement possibilities, from a technical,
economical and environmental point of view.
Green Technology inside:
Energy saving “e” setting:
24 % energy saving*
100%
100% of packaging,
80% of the appliance can be recycled
*i
Wa
Before throwing a used appliance away, you should make it
noticeably
to dispose of it in accordance with current laws
Your retailer,
information about these.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste
electrical and electronic equipment - WEEE).
The guideline determines the framework for the
return and re
throughout the EU.
Before using the Iron for the first time
Please carry out the following steps:
1.
the iron.
2.
3. appliance into the mains and set the temperature
control (H)
(G) on the iron.
4.
lamp
position .
5.
button
It may
short while.
6.
folded cloth
TDA56..
sensixx B4 eco
• This
the information stated on its characteristics plate.
• This
absolutel
it
• If
will
appl will have to be take to a author T
Service Centre.
• In avoid unfavourable
phenomena like
can
power Ω
necessary,
for the system impedance at the interface point.
• The
fill the water tank.
• Unplug
if a fault is suspected.
• The
pulling the cable.
• Never immerse the iron in water or any other fluid.
• Do
sun, frost, etc.).
Tips to help you save energy
Steam production
the energy used, follow the advice below:
• Start by ironing the fabrics that require the lowest ironing
temperature.
• Regulate the steam according to the selected ironing
temperature.
• Only
instead.
• Try to Iron the fabrics
steam setting. Steam
than
set the tumble drier to the ‘iron dry’ programme.
• If turn
completely.
• Stand
with the steam regulator on generates wasted steam.
GUARANTEE TERMS
The terms
with stated our for country which
it
retailer was purchased. The SALES
RECEIPT
terms
modifications.
You can download this manual from the local homepages of Bosch
max.
Problem Possible Causes Solution
Iron does not
work or is not
heating up
Temperature control (H) set to
minimum
Turn the temperature
control to the desired
position
Connection problems Check that the plug is
inserted into the mains
socket correctly
The automatic shut-off system
has been activated (*)
Move the iron gently from
side to side to re-start it
Iron is not
steaming
Th Fill the water tank
The steam regulator (A) is in
the position
Set the steam regulator to
the relevant position
Water is dripping
from the holes in
the soleplate
Temperature control (H)
setting is too low.
Set the temperature control
within the steam area
(between the “••” and
“max”) or turn the steam
regulator (A) to
Steam regulator (A) is set too
high in conjunction with a low
temperature.
Turn the steam regulator to
a lower setting.
You have pressed the shot of
steam button (L) repeatedly
without waiting for 5 seconds
between each press
Wait 5 seconds between
each press of the jet of
steam button
Water has been left in the tank
(D) when the sole
cold, with the steam regulator
(A) set at or
Always empty the tank
after ironing and set the
steam regulator to after
ironing and when filling the
tank
Distilled water has not been
used (see “Filling the water
tank” section) or other
products such as fragrant
water have been added to
the tank
Mix distilled water with
tap water as directed in
the “Filling the water tank”
section and never add any
other products to the water
tank
Spray does
not work.
No water in the tank. Add water to the water
tank.
Obstructed mechanism. Contact an Authorised
Technical Service Centre.
The iron
begins to
smoke when
switched on.
During first use: Certain
components on the appliance
have been lightly greased at
the factory and may produce
a little smoke when initially
heated.
This is completely normal
and will stop after a short
while.
Deposits
come out
through the
holes in the
soleplate
Traces of lime scale are
coming out of the steam
chamber
Carry out a cleaning cycle
(see “self cleaning” section)
Flashing lamp
on top of
handle
Auto-shut off has been
activated.
Move the iron gently
fromside to side to re-start
it. The lamp will then flash
once before it re-heats
