Bedienungsanleitung Bosch tds 1606 (Seite 14 von 114) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

324038

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

Trouble shooting

Problem Possible causes Solution

The steam generator

does not come on.

• There is a connection problem.

• The main power button is not

switched on.

• Check the mains cable, the plug

and the socket.

• Switch the main power button (9)

to the on position.(“I”)

The iron does not

heat up.

• The main power button is not

switched on.

• The temperature control knob is

set to the “min” position.

• Switch the main power button (9)

to the on position.(“I”)

• Set the temperature control knob

(11) to the desired position.

4. Fill the boiler with 500 ml of fresh water.

5. Shake the base unit for a few moments

and then empty it completely over a sink or

bucket.

6. To obtain the best result, we recommend that

this operation is done twice

7. Close the cap

Cleaning & Maintenance

Important:

Always unplug the appliance from the mains

supply before carrying out any cleaning or

maintenance operation on it.

1. After ironing, pull out the plug and allow the

appliance to cool down before cleaning.

2. Wipe the housing, handle and iron body with

a damp cloth.

3. If the soleplate is soiled with dirt or scale,

clean it with a damp cloth.

4. Never use abrasive products or solvents.

Storing the appliance (D)

1. Set the main power to the “0” position and

disconnect the mains cable.

2. Always allow the appliance to cool down

before storing it.

3. Place the iron on the iron pad, standing on the

soleplate.

4. Empty the boiler and store the mains cable and

the steam hose in the storage compartment.

Do not wrap the cords too tight.

5. Use the carrying handles (17) on the sides

when moving the appliance.

Fabric protection soleplate

cover (E)

(depending on the model)

The fabric-protection soleplate cover is used for

steam-ironing delicate garments at maximum

temperature without damaging them. Use of the

soleplate cover also does away with the need for

a cloth to prevent shine on dark materials.

It is advisable to first iron a small section on the

inside of the garment to see if it is suitable.

To attach the soleplate cover to the iron, place

the tip of the iron into the end of the soleplate

cover and pull the elastic strap over the lower

rear of the iron until it fits tightly. To release the

soleplate cover, pull the elastic strap and remove

the iron.

The fabric-protection soleplate cover may

be purchased from the customer service or

specialist shops:

Accessory code

(After-sales)

Name of accessory

(Specialist outlets)

571510 TDZ2045

Tips to help you save energy

Steam production consumes the most energy.

To help minimise the energy used, follow the

advice below:

• Start by ironing the fabrics that require

the lowest ironing temperature. Check the

recommended ironing temperature in the

label on the garment.

• Try to iron the fabrics while they are still damp

and reduce the steam setting.

• If you tumble dry your fabrics before ironing

them, set the tumble drier on the ‘iron dry’

programme.

• If the fabrics are damp enough, you can iron

without steam.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch tds 1606 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info