458020
20
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
20
TR 200
English
The present day is set by depressing the but-
tons “–” (o) or “+” (p).
If afterwards you wish to set the time, depress
the button (q).
When no more alterations are necessary
close the lid.
6.2.4Control knob set to
“Heating”
Setting the heating programme
The time switch makes it possible to automat-
ically switch on the heating system up to three
times a day at a pre-determined time and to
automatically switch it off three times a day a
pre-determined time.
Those times can be determined individually
for each day.
It is also possible to set the same times for
each day.
To make programming more effective it is
useful to fill in the heating times into the table
provided (see chapter 10). The heating pro-
gramme which is used for most days of the
week (also applicable if the times deviate
slightly) should be filled in for all days in the
first step. The deviating times can later be ef-
fortlessly altered.
Turn the control knob (n) to . The display (e)
shows:
Select day +/-
Depress the button “–” (o) or “+” (p). All days
(or the present day) is displayed in the upper
line.
In the setting
All days both “heating operation”
and “economic operation” will start at the re-
spective times each day.
If only one day of the week (e.g. Thursday)
was selected, the set programme for this day
always starts at the pre-set time on this day,
i.e. each Thursday both “heating operation”
and “economic operation” will start at the set
times.
One single day can be set by depressing the
buttons “–” (o) or “+” (p).
Between
Sunday and Monday All days is dis-
played.
The heating times can be set for the displayed
day/all days. For this, depress the button
(q).
The display (e) shows:
1. Start heating
6:00
The required first starting time for heating is
set by depressing the button “–” (o) or “+” (p).
Briefly depressing the button alters the start-
ing time by 10 minutes, when the button is de-
pressed for a longer period the time runs fast-
er forward or backward.
When the required starting time is selected
depress the button (q).
Now the respective first starting time for eco-
nomic operation must be set.
The display (e) shows:
1. Start econom.
22:00
The required first starting time for economic
operation is set by depressing the button
“–” (o) or “+” (p).
Briefly depressing the button alters the start-
ing time for economic operation by 10 min-
utes, when the button is depressed for a long-
er period the time runs faster forward or back-
ward.
As soon as the required starting time for eco-
nomic operation is selected depress the but-
ton (q).
The display (e) shows:
2. Start heating
--:--
Note: --:-- means that this starting time was
not programmed, i.e. only one start-
ing time for heating operation and
one for economic operation is pro-
grammed at initial operation (factory
pre-setting) or after a longer power
failure.
If required, the second starting time for heat-
ing operation can now be set as described
above, in the chapter “setting the first starting
time”.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bosch-tr-200

Suche zurücksetzen

  • Bei unserem Junkers TR 200 möchte ich die Nachtabsenkung ändern. Wie muss ich vorgehen?
    Eingereicht am 18-4-2022 09:36

    Antworten Frage melden
  • Sparbetrieb schaltet sich nicht ein!
    Sparbetrieb heizt nicht!
    Spartemperaturregler ist richtig eingestellt.
    Heizungsregler funktioniert einwandfrei. Eingereicht am 9-3-2022 08:57

    Antworten Frage melden
  • bitte wo schließe ich die kabel an .Klemmleiste 1246RF Kabel schwarz braun blau Eingereicht am 25-2-2022 15:26

    Antworten Frage melden
  • Hallo, hatte meinen Raumtemperaturregler Best nr 7744901046 Junkers TR 200 ausgestellt, als ich ihn wieder anstellte erschienen Urlaubstage , die ich dann ausstellte, gab neue Daten ein , der Regler funktionierte was die Zeiten betrifft einwandfrei, nur die Temperatur stieg höher. haben Sie einen Rat ? Vielen Dank im voraus Eingereicht am 14-10-2021 12:38

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch TR 200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch TR 200

Bosch TR 200 Kurzanleitung - Deutsch - 1 seiten

Bosch TR 200 Bedienungsanleitung und Installationsanweisung - Deutsch - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info