Bedienungsanleitung Bosch TWK3P424 (Seite 10 von 86) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

765426

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Congratulations on purchasing this

Bosch appliance. You have acquired a

high-quality product that will bring you

a lot of enjoyment.

Parts and operating

controls

1 Kettle (with water level indicator)

2 Lid with lock

3 Lid release button

4 ON/OFF O switch, illuminated

5 Limescale filter (removable)

6 Base

7 Cable tidy

Important: Use the kettle only with its

included base.

Only fill the kettle with water. Milk

and instant beverages will burn and

damage the appliance. Never operate

the kettle without water and do not overfill

it; observe the min and max markings.

If the kettle is too full, the water will boil

over!

Before using for the first

time

Remove any stickers or film.

Unroll the right amount of cable from the

cable tidy and plug it in.

Fill the kettle with water. Bring the water

to a boil and discard it. Repeat the

procedure. This will make sure that the

kettle is clean for normal use.

When the water comes to a boil for the

first time, add a tablespoon of white

vinegar.

Boiling water

Fill the kettle with fresh water through the

spout or the open lid (press lid release

button).

Read the quantity on the water level

indicator. Do not fill with less than

0.25 litres or more than 1.7 litres of water!

Close the lid until it locks and place the

kettle on the base.

Press down the ON/OFF O switch; the

switch lights up. The water is heated.

The kettle switches off automatically once

the water has boiled.

The appliance can also be switched off

at any time by pulling up the ON/OFF O

switch.

Warning: If you remove the kettle from

the base and replace it before the heating

process is over, the kettle will not continue

to heat the water.

N.B.:

Only operate the kettle with the lid closed

and the limescale filter inserted, otherwise

the kettle will not switch off.

For physical reasons, the base may

collect some condensation water. This is

normal; it does not mean that the kettle

leaks.

After boiling, let the kettle cool down for

5 minutes before refilling it with water.

Warning: If the kettle is empty when

switching the appliance on, the overheat

control will switch it off automatically.

Cleaning and maintenance

WDanger of electric shock!

Never immerse the device in water or place

it in the dishwasher!

Do not steam-clean the appliance.

Before cleaning, unplug the appliance

from the power outlet.

Clean the outside of the kettle and base

with a damp cloth. Do not use strong or

abrasive cleaning agents.

Remove the limescale filter, soak it in a

little vinegar, then rinse clean with clear

water.

Rinse the kettle and the limescale filter

with clear water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch TWK3P424 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info