Bedienungsanleitung Bosch TWK7203GB (Seite 6 von 26) (Deutsch, Englisch)

774875

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Congratulations on the purchase of

your new Bosch appliance. You can find

further information about our products

on our website.

Parts and controls

1 Kettle (with water level indicator)

2 Lid

3 Lid release button

4 a On/Off button

5 Temperature setting (illuminated display)

6 U button (keep warm)

7 Limescale filter (removable)

8 Base

9 Cable tidy

Important: The kettle should only be used

with the base supplied.

■The kettle should only ever be filled

with water. Milk or instant products will

burn and damage the appliance. Never

operate the kettle without water or overfill:

observe the min and max markings. If

the kettle is too full, the water will boil

over!

Before using for the

first time

■Remove any stickers or film.

■Unwind the cord to the required length

and plug in. The temperature display and

a On/Off and U (keep warm) buttons will

light up briefly. A signal sounds.

■Fill the kettle with water and bring to the

boil twice to clean it thoroughly.

■When the water comes to the boil for

the first time, add a tablespoon of white

vinegar.

Boiling water

1. Fill the kettle with fresh water through

the spout or the opened lid (press button

to open lid).

2. You can see the filling level on the water

level indicator. Observe the min and

max markings!

3. Close the lid, pressing down until it

clicks into place.

4. Place the kettle on the base.

5. Touch the a On/Off button. A signal

will sound and the temperature last set

lights up.

6. A temperature between approx. 70°C

and approx. 100°C can be selected by

touching the temperature setting.

7. The water is heated.

8. Boiling stops automatically once

the specified temperature has been

reached. A signal sounds.

The temperature display lights up for

approx. 1 minute and then goes out.

Notes:

■Touch the a On/Off button to

re-heat water that has cooled down.

The temperature setting will be saved

as long as the appliance is connected to

a power source.

■The temperature can be changed at any

time during the heating process.

■When the kettle is placed on the base,

the temperature selected lights up briefly.

■While the kettle is heating up, the

temperature selected flashes until it has

been reached.

■During the heating process the water

temperature currently reached is

displayed on the temperature setting.

■If the temperature cannot be set, the

water in the kettle is hotter than the

desired temperature. The current

temperature lights up.

■You can end heating at any time by

touching the a On/Off button again.

Important: The water will not be heated

if a On/Off is not lit up. The temperature

display shows the temperature of the water

in the kettle for approx. 1 minute and then

goes out.

Attention: If you lift the kettle from the base

and replace it before the water has boiled,

the kettle will not continue heating.

Notes:

■Water should only be boiled with the lid

closed and the limescale filter inserted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch TWK7203GB Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch TWK7203GB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info