Bedienungsanleitung Bosch UniversalGardenTidy 2300 (Seite 18 von 303) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

777047

Zoom out

Zoom in

Vorherige Seite

1/303

Nächste Seite

18 | English

Disassembling (see figure E)

uBefore any work on the product, disconnect supply

cord from the mains.

Press button (11) in and remove the nozzle (12).

Loosen the fastening screw (3). Remove the safety cover (4)

and store it securely.

Vacuum Mode

Assembling (see figures F and G)

uBefore any work on the product, disconnect supply

cord from the mains.

Connect the three parts of the vacuum tube (7). Take care

not to pinch your fingers during assembly.

Mount the vacuum tube (7) onto the motor unit. Insert the

vacuum tube (7) into the hinge on the motor unit. Raise the

vacuum tube (7) to align the fastening screw with main hous-

ing, and screw in the fastening screw (3) until fully tight and

clicks are heard to secure the vacuum tube.

Mount the collection bag (10) to the motor unit and attach

the bag clips to the hooks on the vacuum tube. Take care not

to pinch your fingers during assembly.

Mounting the shoulder strap (seefigure H)

Fasten the shoulder strap (9) with both hooks (8) to the

shoulder strap loops (13), Adjust the shoulder strap (9) so

that it comfortably carries the weight of the product and can

be guided easily.

Mounting and Adjusting the handle (see figures I

and J)

To attach the handle, place the handle (5) over the holders

on the tube, then insert the screw (6) though the handle and

tighten.

To adjust the angle, loosen the screw (6), move the handle

(5) up or down to the desired working position and then

tighten the screw (6) again.

Operating (see figures K, L and M)

Beware of trip hazards such as the supply cable or unatten-

ded product. Make sure that the cable is not in your way

while working. Fasten the cable in the cable holder on the

side of the auxiliary handle. (seefigureK)

To switch on, turn the On/Off switch (1) clockwise until it

clicks.

The airflow speed is variable. To increase the airflow speed,

turn the On/Off switch (1) clockwise.

To reduce the speed, turn the On/Off switch (1) anticlock-

wise.

Direct the vacuum tube towards the debris that you want to

collect. If no debris is collected/moved, increase the airflow

speed.

To switch off, turn the On/Off switch (1) anticlockwise until

it clicks.

Set the On/Off switch (1) of the product to "0" before dis-

connecting the mains voltage or pulling the mains plug.

Disassembling (see figures N and O)

uBefore carrying out any work on the product, discon-

nect supply cord from the mains.

To empty the collection bag (10), press button (11) and re-

move the collection bag (10). Remove the clips from the va-

cuum tube (7). Open the zip and empty the collection bag

(10) as required.

To disassemble, press button (11) and remove the collec-

tion bag (10). Remove the clips from the vacuum tube (7).

Take care not to pinch your fingers during disassembly.

Loosen the fastening screw (3). Remove the vacuum tube

(7) and store it securely.

Working Advice

When operating, always point the nozzle/vacuum tube to-

wards the ground.

Do not blow hot, flammable or explosive material.

The product is only suitable for foliage and garden waste.

Please inspect the area for little animals and hard objects be-

fore using the product.

Do not vacuum liquids, plastic bags, cans, pine cones,

branches larger than 5mm (Ø>5mm), cloth, tissues and

pegs.

The motor will only start, if the following parts are assembled

correctly:

–vacuum tube and collection bag in vacuum mode

–nozzle and safety cover in blow mode

Troubleshooting

Problem Possible Cause Corrective Measure

Product does not run Components not assembled correctly, safety in-

terlock activated See “assembly”. Check that the tube and the

safety cover (Blow Mode) or the tube and the col-

lection bag (Vacuum Mode) are fully assembled,

clicks are heard.

F 016 L94 042 | (17.09.2020) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch UniversalGardenTidy 2300 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info