Bedienungsanleitung Bosch UniversalHeat 600 (Seite 10 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch)

766887

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

10 | English

a person responsible for their

safety supervises them or has in-

structed them in the safe opera-

tion of the heat gun and they un-

derstand the associated dangers.

Otherwise there is a risk of operating

errors and injury.

uSupervise children during use,

cleaning and maintenance. This will

ensure that children do not play with

the heat gun.

uHandle the power tool with care.

The power tool produces intense

heat which increases the risk of fire

and explosion.

uTake particular care when working in the vicinity of

flammable materials. The hot airflow or hot nozzle may

ignite dust or gases.

uDo not work with the power tool in potentially explos-

ive areas.

uDo not aim the hot airflow at the same area for pro-

longed periods. Working with plastic, paint, varnish or

similar materials may produce easily flammable gases.

uPlease be aware that heat is directed to covered flam-

mable materials, which may ignite.

uSafely place the power tool on the storage surfaces

after use and let it cool completely before packing it

away. The hot nozzle can cause damage.

uDo not leave the switched-on power tool unattended.

uStore idle power tools out of the reach of children. Do

not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

uDo not expose the power tool to rain or wet condi-

tions. Water entering a power tool will increase the risk of

electric shock.

uDo not misuse the cable, for example by using it to

carry, hang up or unplug the power tool. Keep the cable

away from heat and oil. Damaged or entangled cords in-

crease the risk of electric shock.

uAlways wear safety goggles. Safety goggles reduce the

risk of injury.

uPull the plug out of the socket before adjusting the

tool settings, changing accessories, or storing the

power tool. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

uAlways check the power tool, cable and plug before

use. Stop using the power tool if you discover any

damage. Do not open the power tool yourself, and

have it repaired only by a qualified specialist using

only original replacement parts. Damaged power tools,

cables and plugs increase the risk of electric shock.

Keep your work area well-ventilated. The

gas and steam produced during work are often

harmful to one's health.

uWear protective gloves and do not touch the nozzle

while it is hot. There is a risk of burns.

uDo not direct the airflow at persons or animals.

uDo not use the power tool as a hair dryer. The outgoing

airflow is considerably hotter than that that of a hair

dryer.

uDo not allow foreign objects to enter the power tool.

uThe distance between the nozzle and the workpiece

depends on the material you are working on (metal,

plastic, etc.) and the intended working method. Al-

ways test the amount of air and temperature first.

uIf operating the power tool in a damp location is un-

avoidable, use a residual current device (RCD) protec-

ted supply. Use of an RCD reduces the risk of electric

shock.

uNever use the power tool if the cable is damaged. Do

not touch the damaged cable and pull out the mains

plug if the cable is damaged while working. Damaged

cables increase the risk of an electric shock.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric

plug with internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

Product Description and

Specifications

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The power tool is intended for stripping coats of paint, thaw-

ing water pipes, bending plastic, melting adhesive bonding,

killing weeds and heating shrink tubing.

The power tool is intended to be operated by hand, under

supervision.

1 609 92A 66S | (09.12.2020) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch UniversalHeat 600 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info