Bedienungsanleitung Bosch UniversalMulti 12 Multitool (Seite 23 von 145) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708268

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

English | 23

Bosch Power Tools 1 609 92A 3AY | (3.3.17)

Removing (see figure B)

Open the AutoClic lever 1 all the way. The application tool/

accessory will be ejected.

Mounting and Adjusting the Depth Stop

The depth stop 14 can be used when working with segment

saw blades.

If required, remove an already mounted application tool/

accessory.

Slide the depth stop 14 over and beyond the tool holder 9 to

the stop onto the gear head of the power tool with the labelled

side facing upward.

The depth stop is intended for the following cutting depths:

– With segment saw blades ACZ 85 .. with a diameter of

85 mm: 8 mm, 10 mm, 12 mm and 14 mm cutting depths

(see indication on the depth stop in large font and not in

brackets).

– With segment saw blades ACZ 100 .. with a diameter of

100 mm: 14 mm, 16 mm, 18 mm and 20 mm cutting

depths (see indication on the depth stop in smaller font

and brackets).

Insert the appropriate segment saw blade for the desired cut-

ting depth. Slide the depth stop 14 from the tool holder 9 in

the direction of the application tool until you can rotate it free-

ly. Rotate the depth stop 14 so that the desired cutting depth

is above the section of the saw blade, which will be used to

saw. Slide the depth stop 14 once again to the stop onto the

gear head of the application tool.

For all other cutting depths and when working with other

application tools, remove the depth stop 14. For this, remove

the application tool and pull the depth stop from the gear

head.

Mounting the Auxiliary Handle (optional accessory)

The vibration-damped auxiliary handle enables the tool to be

used safely and more comfortably.

Screw the auxiliary handle on the right or left of the machine

head depending on the working method.

 Do not continue to use the power tool when the auxilia-

ry handle is damaged. Do not make any changes or

modifications to the auxiliary handle.

Mounting/Replacing a Sanding Sheet on the Sanding

Plate

The sanding plate 12 is fitted with Velcro backing for quick

and easy fastening of sanding sheets with Velcro adhesion.

Before attaching the sanding sheet 13, free the Velcro back-

ing of the sanding plate 12 from any debris by tapping against

it in order to enable optimum adhesion.

Position the sanding sheet 13 flush alongside one edge of the

sanding plate 12, then lay the sanding sheet onto the sanding

plate and press firmly.

To ensure optimum dust extraction, pay attention that the

punched holes in the sanding sheet match with the holes in

the sanding plate.

To remove the sanding sheet 13, grasp it at one of the tips and

pull it off from the sanding plate 12.

You can use all sanding sheets, fleece pads/polishing cloth

pads of the Delta 93 mm series of Bos

h accessory program.

Sanding accessories, such as fleece pads/polishing cloth

pads, are attached to the sanding plate in the same manner.

Selecting the Sanding Sheet

Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:

Sanding disc Material Application Grain size

Red quality

– All wooden materials

(e. g., hardwood,

softwood, chipboard,

building board)

– Metal materials

For coarse-sanding, e. g. of rough, unplaned beams

and boards

coarse 40

For face sanding and planing small irregularities

medium 80

100

120

For finish and fine sanding of wood

fine 180

240

320

400

White quality

–Paint

–Varnish

– Filling compound

– Filler

For sanding off paint coarse 40

For sanding primer (e. g., for removing brush dashes,

drops of paint and paint run)

medium 80

100

120

For final sanding of primers before coating

fine 180

240

320

OBJ_BUCH-2957-001.book Page 23 Friday, March 3, 2017 2:20 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch UniversalMulti 12 Multitool Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info