Bedienungsanleitung Bosch UniversalVac 18 (Seite 11 von 111) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

707898

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

switches the cordless dust extractor off when the battery is

drained.

The battery must be removed from the vacuum cleaner to

charge it.

u Do not continue to press the on/off button after the

vacuum cleaner has automatically switched itself off.

This can damage the battery.

The battery features NTC temperature monitoring, which

only permits charging in a temperature range between 0 °C

and 45 °C. This achieves a long battery life.

A significantly reduced operating time after charging indic-

ates that the battery has deteriorated and must be replaced.

Follow the instructions on correct disposal.

Battery charge indicator

When the on/off switch (2) is pressed in completely, the bat-

tery charge indicator (3) indicates the battery's state of

charge for several seconds. The indicator consists of three

green LEDs.

LED Capacity

Continuous lighting 3x green ≥ 66%

Continuous lighting 2x green 33–66%

Continuous lighting 1x green 11–33%

Slowly flashing light 1 x green ≤ 10%

Inserting and Removing the Battery

u Do not use force to insert the battery. The battery is de-

signed in such a way that it can only be inserted into the

vacuum cleaner when it is in the right position.

– Insert the charged battery (4) into the vacuum cleaner

until you feel it engage and it is securely locked in place.

– To remove the battery (4), press the release button(12)

on the battery and pull it out of the vacuum cleaner as

shown in the image (see figure A). Do not use force to do

this.

Fitting the vacuum cleaner accessories (see

figure B)

u Remove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

The vacuum cleaner accessories can be directly connected

with the dust container(6).

See the illustration for the different ways of combining the

vacuum cleaner accessories.

– Insert the individual vacuum cleaner accessories firmly

into the connection on the dust container(6) and into one

another.

Operation

u Remove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

Start-up

u Before extraction, ensure that the filter unit is se-

curely fitted.

u Do not use damaged filters (e.g. no cracks, small

holes, etc.). Replace any damaged filters immedi-

ately.

Switching on/off

– To switch on the vacuum cleaner, press the on/off but-

ton(2).

– To switch off the vacuum cleaner, press the on/off but-

ton (2) again.

Maintenance and Servicing

Maintenance and cleaning

u Remove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

u To ensure safe and efficient operation, always keep

the dust extractor and the ventilation slots clean.

– Clean the housing of the vacuum cleaner occasionally

with a damp cloth.

– Clean dirty charging contacts using a dry cloth.

Cleaning the Dust Container (see figures C1–C2)

Clean the dust container (6) after each use in order to en-

sure that the vacuum cleaner continues to perform optim-

ally.

– Hold the vacuum cleaner down slightly so that dust can-

not fall out of the dust container when the vacuum cleaner

is opened.

– Press the release button(1) and remove the dust con-

tainer(6) from the motor housing(5).

– Shake out the dust container (6) over a suitable waste

bin.

– If necessary, clean the filters(see "Cleaning the filters

(see figuresD1 – D4)", page11).

– Then fit the dust container into the bottom of the motor

housing and apply light pressure to the dust container un-

til you hear it click into place.

Cleaning the filters (see figuresD1 – D4)

The fine dust filter(16) must not be wet cleaned.

– Hold the vacuum cleaner down slightly so that dust can-

not fall out of the dust container when the vacuum cleaner

is opened.

– Press the release button(1) and remove the dust con-

tainer(6) from the motor housing(5).

– Brush the coarse dirt filter(14).

English | 11

Bosch Power Tools 1 609 92A 4E3 | (13.08.2018)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch UniversalVac 18 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info