745916
45
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
Trouble shooting en
45
3Trouble shooting
Tr oubl e s hoot i ng
--------
Fault messages
If a fault message beginning with “§§ appears on the
display, set the function selector to "Off". If the fault
message does not disappear, please contact our after-
sales service.
--------
Fault Possible cause Notes/remedy
The appliance does not work The plug is not plugged into the mains Connect the appliance to the power supply
Power cut Check whether other kitchen appliances are working
The circuit breaker is faulty Check in the fuse box to make sure that the fuse for
the appliance is OK
The appliance cannot be started The appliance door is not fully closed Close the appliance door
The appliance is not switched off Switch the appliance off and back on again
‚ƒ:‹‹ is flashing on the display
Power failure Reset the clock.
The interior lighting is not working Gentle top/bottom heating mode is active In gentle top/bottom heating mode, the interior light-
ing is not switched on.
The bulb is faulty Replace the bulb.
All food that is cooked in the oven
burns within an extremely short
period of time.
Thermostat faulty. Call the after-sales service.
Door panels are steamed up. This is normal and results from differences in temper-
ature.
Heat the appliance up to 100°C and then switch it
back off after 5minutes.
Although the appliance is switched
on, it cannot be operated; the
D symbol is shown on the display
The childproof lock is activated.
Press and hold the ] touch button until the
D symbol goes out.
The appliance door will not open; the
n symbol is shown on the display
The appliance door remains locked until the cooking
compartment has cooled down.
Wait until the n symbol goes out
Fault message Possible cause Information/remedy
“§§‚
Temperature sensor failed. Call the after-sales service.
“§§ƒ
The temperature in the cooking compartment is too
high.
Call the after-sales service.
“§§…
Door locking mechanism incorrectly activated. Call the after-sales service.
“§§†
Fan heating element faulty or not connected. Call the after-sales service.
“§§‡
Motor faulty or not connected. Call the after-sales service.
“§§‰
Cooling fan faulty or not connected. Call the after-sales service.
45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch VBD5780S0 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info