6
en
Water drainage (pic. 4)
! When setting up and connecting the apĆ
pliance to the water outlet supply, make sure
the pipe is not bent or twisted. Do not pull the
pipe!
! If draining through a sink, make sure the disĆ
charge pipe cannot be moved from its locaĆ
tion. Also check the rapid discharge of water
through the draining of the sink. Make sure
the plug is not blocking the sink.
Connecting to the electricity supply
The appliance must only be connected to an
alternating current power supply via a socket
that has been properly installed and earthed.
The voltage which is given on the specificaĆ
tions plate must coincide with the mains voltĆ
age where the appliance is connected.
The connection values and the fuses or trip
switch that is required are given on the speciĆ
fications plate.
Make sure that the socket and the plug conĆ
nected to the appliance are compatible and
that the plug is properly earthed.
Do not use multiple plugs, cables or connecĆ
tions or extension cables.
In the event of using a current-operated cirĆ
cuit breaker, only one with the symbol 7
can be used. Only this type of protection
switch will assure the observance of current
regulations on the matter.
Only remove the power plug from the
mains by holding the plug itself.
Do not insert or remove the power plug with
wet hands.
