10
en
Extra function and start buttons
R: an extra rinse cycle is performed.
Inicio M: To start the wash cycle. A programme
must previously have been selected.
! For safety reasons, the machine does not
start until the door is properly closed.
Screen (pic. 5 - 8)
The screen shows the information that has to be
indicated in some cases before the programme
is started, such as the time remaining, the wash
temperature or the spin speed, etc. Once the
programme has started, the time remaining is
shown; ö" will be shown when the
programme has finished; is ò" (without final
spin) is selected, ò" will appear to remind us
that there is still water in the washing machine.
Spin B": Press this button to select the required
spin speed. With the extra function without final
spin ò".
Spin speed
Rpm
(depending on model) Programme
1200 / 1000 Resistentes/Algod.
800 / 800 Sintéticos
800 / 800 Mix
600 / 600 Delicado
800 / 800 Lana/lã
800 / 800 Rápido
800 / 800 K
800 / 800 B Centrif. adicional
! If during the wash, the B button is pressed
once briefly, the selected speed is shown; if
it is pressed repeatedly, the selection is
modified (bear in mind that following the final
spin the new value will have no effect).
Temperature O": Press this button to select the
wash temperature required for the selected
programme (see Programme selector" table).
! If during the wash, the O button is pressed
once briefly, the selected temperature is
shown; if it is pressed repeatedly, the
selection is modified (bear in mind that when
the temperature has reached the required
level, the new value will have no effect).
Time W": The start time may be adjusted
between 0 and 24 hours. The time will be
cancelled when the button is pressed once
more. The programme will begin automatically at
the time programmed.
Time remaining
When the programme is selected, its
approximate duration will be shown.
m Set the programme selector control to the
desired programme. The warning light «preĆ
parado-lavar» flashes. The screen shows
the time remaining (programme duration), for
instance 1:18 = 1 hour and 18 minutes..
At the end of the programme ö" appears on
the screen.If ò" (without final spin) has been
selected, ò" appears when the programme is
finished.
! While the programme is running, its duration
may increase or decrease due to the
following:
Time increase:
- extra rinse cycle if the laundry has too much
foam,
- multiple spin if the laundry is not well distribĆ
uted around the drum,
- increase in heating time if, for instance, the
water is too cold,
- excessively low water pressure,
- selection of an extra option,
- highly absorbent laundry.
Time decrease:
- light loads,
- decrease in heating time if, for instance, the
temperature of the water is very warm.
