550928
14
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
en Programme default settings
14
0 Programme default
settings
Programme default settings
The spin speed and programme
duration ("Ready in" time) for all
programmes are preset at the factory.
These are displayed in the display panel
after selecting the programme.
You can change the default settings as
follows.
0 Spin speed
Before and while the selected
programme is running, the spin speed
or $ (without final spin, laundry soaks
in the last rinsing water, display panel - -
-) can be set. The effects depend on
the programme progress.
The maximum selectable spin speed
depends on the model and the set
programme.~ Page 12
5 Finished in
When you select the programme, the
relevant programme duration is
displayed.
The programme duration is
automatically adjusted when the
programme is running. Changes to the
programme default settings or
programme settings also change the
programme duration.
Before starting the programme, the
programme end ("Finished in" time) can
be preselected in increments of one
hour (h = hours) up to a maximum of 24
hours.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
Note: The programme duration is
included in the selected "Finished in"
time.
After the start, the preselected time e.g.
8 h is displayed and the time counts
down to the start of the washing
programme. The programme duration is
then displayed, e.g. 2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
1. Press the Finished in button
repeatedly until the required number
of hours is displayed.
2. Press the Start/Reload button.
Adding laundry while the preselected
time continues running:
1. Press Start/Reload.
2. YES lights up in the display panel.
The washing machine door can be
opened and you can add laundry.
3. Close the washing machine door.
4. Press the Start/Reload button. The
preselected time continues to run.
\ Additional programme
settings
Additional programme settings
G Speed*
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note: Do not exceed the maximum
load.
Overview of programmes ~ Page 12
F Eco*
For saving energy with a washing result
comparable to that of the standard
programme.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch WAE28369 - Classixx 7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info