600706
18
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
en Operating the appliance
18
Adding/removing laundry
Following the start of the program, you
can add or remove laundry as required.
Press the A button to do this.
The A button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
If the following appears in the display
panel:
the è symbol disappears, and
adding is possible.
the è symbol lights up, it is not
possible to add laundry.
To continue the program, press the
button A. The program continues
automatically.
Notes
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
The load display is not active during
reloading.
Changing the programme
1. Press the A button.
2. Select another program.
3. Press the A button.The new
program starts from the beginning.
Cancel the programme
For programs at high temperature:
1. Press the A button.
2. To cool down laundry: Select
' Rinse/Freshen up//Rinse.
3. Press the A button.
For programs at low temperature:
1. Press the A button.
2. Select 0 Spin/Drain [.
3. Press the A button.
Programme end during rinse
hold
- - - - 0 appears in the display panel and
the indicator lamp of the A button
flashes.
Continue the program by:
Pressing the A button or
Selecting a spin speed or setting the
program selector to 0 Spin/Drain [
and then pressing the A button.
Programme end
End appears in the display panel and the
indicator lamp of the A button is off.
Removing laundry/switching
off the appliance
1. Open the washing machine door and
remove the laundry.
2. Turn the programme selector to Off.
Appliance is switched off.
3. Turn off the tap.
Not required for Aqua-Stop models.
Contents of package
Notes
Do not leave any items of laundry
in the drum. They may shrink in the
next wash or discolour another
item.
Remove any foreign objects from
the drum and the rubber seal – risk
of rusting.
Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.
Always remove the washing.
Always wait until the programme
ends, as the appliance could still
be locked. Switch the appliance on
and wait for the unlocking device.
If at the end of the programme the
display has gone out, the energy
saving mode is active. To activate,
select any button.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bosch-wap28480

Suche zurücksetzen

  • Wenn ich das Programm Baumwolle mit Vorwäsche einstelle, wird das Waschmittel bei Start aus Kammer 1 und 2 gleichzeitig in die Maschine gespült. Eingereicht am 7-2-2017 16:16

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch WAP28480 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch WAP28480

Bosch WAP28480 Bedienungsanleitung - Deutsch - 32 seiten

Bosch WAP28480 Bedienungsanleitung - Holländisch - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info