11
When the programme ends, the displays shows -0-.
² While the programme is running, the programme
duration may be extended or reduced for the
following reasons.
Reductions in time occur because of:
– small loads,
– reduced heating times, e.g. if the water is very hot,
– reduced washing temperature after the programme
has started,
– the laundry for drying with low residual moisture.
Increases in time occur because of:
– additional rinse cycle if excessive foam is in the
laundry,
– multiple spinning if the laundry is distributed poorly
in the drum,
– increased heating times, e.g. when the water is too
cold,
– water pressure too low,
– selection of an additional option, e.g. Rinse Plus
O
and/or Wash Plus È after the programme has
started,
– very absorbent washing extends the heating
duration,
– the laundry for drying is wet.
Finish in time You can select the finish in time, see page 32.
Drying duration or
automatic drying
You can set the drying duration or automatic drying by
touching the Š
Dry button, see page 28. When the
washing and drying without a break was selected, time
drying or auto drying duration will add in programme
duration automatically. Related programmes will
prolong 5-15 minutes for good washing performance.
