Bedienungsanleitung Bose 191 (Seite 32 von 34) (Englisch)

418941

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English

Reference

Troubleshooting

Customer service

For additional help in solving problems, contact your Bose dealer. Or, to contact Bose Customer Service, refer to the

address list included in the carton.

Warranty period

Bose Virtually Invisible

191 speakers are covered by a limited 5-year transferable warranty. Details of coverage are on the

warranty card that came with your speakers. Please ﬁll out the information section, detach, and mail it to Bose.

Neither speaker

plays

• Check the settings on your receiver/ampliﬁer. Refer to the owner’s guide that came with it for

instruction on settings.

• If your Virtually Invisible

191 speakers are the second pair of speakers connected to your

receiver/ampliﬁer, make sure the connections have been made to the “B” terminals and that

the “B” speakers are selected to play.

The bass or treble

is weak

• Check the tonal balance setting on your receiver/ampliﬁer.

• Check for consistent polarity of the connections (+ to + and – to –) to the receiver/ampliﬁer and

to the speaker.

Review “Make the speaker connections” on page 26.

Only one speaker

plays

Only one speaker

still plays

• Check the balance control on your receiver/ampliﬁer and make sure it is centered.

• Check the wires connected to the speaker that does not play. Make sure the wires are in good

condition and are ﬁrmly connected. Review “Make the speaker connections” on page 26.

•Trace the cord from the speaker in question to the receiver/ampliﬁer. Disconnect the cord from

the receiver/ampliﬁer channel and reconnect it to a different receiver/ampliﬁer channel.

– If the performance is now ﬁne, the problem lies in the original receiver/ampliﬁer channel, the

component source of the music, or the connections between the receiver/ampliﬁer and the

source. Check all of those to make sure they are performing properly. Reconnect the speaker

to the correct channel of a functioning receiver/ampliﬁer.

– If the problem persists, its source is either the speaker wire or the speaker in question. Follow

the next instruction.

• Disconnect the cord from the speaker in question and reconnect it to the second speaker.

– If the performance is now ﬁne, the problem lies in the original speaker. Contact your autho-

rized Bose

dealer, who will arrange for service. Or, to contact Bose directly, refer to the

address list included in the carton.

– If the problem persists, its source is the speaker wires. Follow the next instruction.

• Before you take steps to replace and re-run the speaker wire, recheck all of the connections.

Then repeat the procedure for pinning down the problem source, above.

Static or noise from

one speaker

• Check the connections at the speaker and at the receiver/ampliﬁer. Make sure the wires are in

good condition, are ﬁrmly connected, and no wires are touching across terminals. Also check

the connections from the receiver/ampliﬁer to the component source of the music.

– If the problem persists, follow the troubleshooting instructions for “Only one speaker still

plays,” above.

HD OG.book Page 32 Tuesday, July 8, 2003 3:43 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bose 191 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bose 191

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info