Bedienungsanleitung Bose acoustimass 10 (Seite 4 von 18) (Englisch)

413992

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

4 December 20, 2001 AM183644_01_V.pdf

Before you begin

Bose

Virtually Invisible

speaker technology allows you to enjoy lifelike home performances

from the very latest surround sound encoded movies, CDs, and television shows, without a

room full of speakers.

Your stereo VCR or stereo television sends the encoded program material to the surround

sound receiver, which interprets it by distributing various sounds to particular speakers.

Although the sound mix varies with different types of programs, dialogue is usually sent to

the center speaker while sounds from the left or right side of the picture go to the left or

right front speakers. Ambient sounds and special effects are directed to one or both of the

surround (rear) speakers. The unique, easy-to-hide Acoustimass

module delivers bass for

all channels. At any point in a surround sound performance, you may hear sound from all or

just a few of the speakers, but the overall experience puts you in the center of the action.

To select surround-encoded program material, look for any of the terms Surround, Dolby

Surround, and the double-D symbol * on tapes and discs, and the

word “surround” preceding a TV broadcast. Your Acoustimass-10 home theater speakers

are also compatible with Dolby AC-3 receivers and program material. The special settings

for Dolby Surround and AC-3 are described on page 11.

You can also enjoy a wide variety of stereo programming that is not surround-encoded with

your Acoustimass-10 speakers. Simply adjust your receiver accordingly.

Setting Up

* Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

WARNING:

The Acoustimass module

weighs 23 pounds (10.5 kg).

Use good lifting practice to

avoid injury.

To avoid danger of suffoca-

tion, keep the plastic bags

that wrap these speakers out

of the reach of children.

Figure 1

What comes in the carton:

• Acoustimass module

• Module end cover

•5 cube speaker pairs

• 20' (6 m) speaker input cable

• 20' (6 m) front speaker output

cable

• 50' (15 m) rear speaker output

cable

• 8 protective rubber feet

• Owner’s Guide

Unpack the carton

• Remove any staples from the opened carton flaps.

• Remove the brown inner carton containing the five cube speaker arrays and the Acous-

timass module terminal cover.

• Gently roll the carton over onto its side and then onto its opening.

• Carefully lift the carton from around the Acoustimass module and packing cushions.

• Do not detach the removable cables connected to the Acoustimass module.

• If the speakers or the Acoustimass module appear damaged, do not use them. Repack

everything in the original carton and contact your authorized Bose dealer immediately.

Note:

Now is a good time to record the serial number of these speakers on page 2 of this

guide and on your warranty card. It is a good idea to save all packing materials for possible

future use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bose acoustimass 10 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bose acoustimass 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info