Bedienungsanleitung Bose Lifestyle 535 Series III (Seite 26 von 34) (Englisch)

561759

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Care and Maintenance

26 - English

Problem What to do

Sound quality has

changed and speaker

array status indicator

is blinking orange (135

series III systems).

Press the Setup button on the control console and select the

“Reconnect Acoustimass” menu item. Follow the on-screen

instructions.

TV does not respond to

remote commands

(135 series III systems)

• Make sure the speaker array is not blocking the IR sensor on

the TV. Change the position of the TV and speaker array so

that the IR sensor is not blocked.

• For details on the location of the TV’s IR sensor, refer to the

owner’s guide that came with your TV.

Intermittent bass

(135 series III systems)

• Check that the status indicator on the Acoustimass

module

is orange and not blinking.

• If the speaker array status indicator is blinking orange:

— Check that the Acoustimass module is plugged into a live

AC wall outlet and the status indicator is glowing orange.

— Press the Setup button on the control console and select

the “Reconnect Acoustimass” menu item. Follow the on-

screen instructions.

— Try moving any possible sources of wireless interference,

such as a wireless computer network router, another

wireless device, or a microwave oven, further away from

the system.

Sound is impaired by

a loud hum or buzz,

which may be electrical

in nature

Contact Bose

Customer Service to determine if and how

other electrical devices in the room may be creating unwanted

signals, and to obtain possible remedies.

Radio does not work • Make sure antennas are connected properly.

• Move AM antenna at least 20 inches (50 cm) from the control

console and Acoustimass module.

• Adjust antenna position to improve reception.

• Make sure the AM antenna is in an upright position.

• Move antennas farther from control console, TV, or other

electronic equipment.

• Select another station. You may be in an area of weak signal

coverage for some stations.

FM sound is distorted • Adjust antenna position to reduce interference.

• Fully extend the FM antenna.

Picture is blurry when

viewing 3D content

• If your 3D glasses are of the active type, make sure they are

turned on.

• Try changing the 3D system option to a different setting.

• If the problem persists, make sure the speaker array is not

blocking the IR sensor on the TV. Change the position of the

TV and speaker array so that the IR sensor is not blocked.

• For details on the location of the TV’s IR sensor, refer to the

owner’s guide that came with your TV.

Sound is distorted • Make sure the audio input cable is not damaged and the

connections are secure on both ends.

• Reduce the volume output level from any external devices

connected to the control console.

• (135 series III systems only) Remove the protective ﬁlm from

the trim and grille on the speaker array and the front of the

Acoustimass module.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bose Lifestyle 535 Series III Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bose Lifestyle 535 Series III

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info