Bedienungsanleitung Bose S1 Pro (Seite 17 von 377) (Alle Sprachen)

704822

Zoom out

Zoom in

Vorherige Seite

1/377

Nächste Seite

English • 17Owner's Guide • S1 Pro System

Care & Maintenance

Cleaning Your S1 Pro

Clean the product enclosure using only a soft, dry cloth. If necessary, carefully vacuum the grille of the

loudspeaker.

CAUTION: Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or

abrasives.

CAUTION: Do not use any sprays near the product or allow liquids to spill into any openings.

Troubleshooting

If you experience problems while using this product, try the following solutions. If you still cannot solve the

problem, seek online help at www.Bose.com/livesound. If you cannot ﬁnd answers to your questions there,

please call the Bose Product and Technical Support Team directly at (877) 335-2673.

Problem What to do

No power Make sure you have power at the AC outlet. Try operating a lamp or other

equipment from the same AC outlet or test the outlet using an AC outlet tester.

Battery may be in protection mode or discharged. Connect it to AC (mains) power.

No sound Make sure your instrument is plugged into the signal input.

Make sure the volume control is turned up on your source.

Make sure the volume control is turned up on the S1 Pro.

Make sure your Signal/Clip indicator is lit.

Plug your instrument into a dierent ampliﬁer to make sure the source is working.

Power LED is red If ﬂashing red, your battery has less than 10% battery life.

If solid red, please call Product and Technical Support at (877) 335-2673.

With nothing

plugged into the

S1Pro, a slight hum

or buzz is heard

Using an AC outlet tester, test the AC outlet the S1 Pro is plugged into for reversed

or open (hot, neutral, and/or ground) contacts.

If using an extension cord, plug the S1 Pro directly into the outlet.

Instrument or audio

source sounds

distorted

Turn volume down on the source; if your audio source volume cannot be adjusted,

"input pads" are available from your preferred instrument retailer.

Try a dierent source or instrument.

Microphone is

encountering

feedback

Turn volume down.

Orient the microphone so that it is not pointing directly at the loudspeaker.

Try a dierent microphone.

Try a dierent position for the loudspeaker and/or vocalist on stage.

Increase the distance from the loudspeaker to the microphone.

If using a vocal eects processor, make sure it is not contributing to the feedback

problem.

Paired Bluetooth®

device will not

connect to the

speaker

If your device requires a passcode, make sure the one you entered is correct.

Make sure Bluetooth functionality is turned on or enabled on your source device.

Your Bluetooth device may be out of range; try moving it closer to the speaker.

If possible, turn o all other nearby Bluetooth devices or disable their Bluetooth

functionality.

Clear the speaker memory or pair to new device by pressing and holding the

Bluetooth button for ten seconds. Pair the Bluetooth device and the speaker again.

Turn the power o and back on; then try re-pairing your device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bose S1 Pro Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bose S1 Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info