Bedienungsanleitung Bose Soundlink Color II (Seite 3 von 32) (Englisch)

704816

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH - 3

REGULATORY INFORMATION

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must

not be co-located or be operating in conjunction with any other antennas or transmitters.

This equipment should be installed and operated with a minimum distance of 8 inches (20 cm) between radiator and

your body.

Meets IMDA Requirements.

CAN ICES-3 (B)/NMB-3(B)

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the

NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original

characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and interfere legal communications; If found,

the user shall cease operating immediately until no interference is achieved. The said legal communications means radio

communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM

radio wave radiated devices.

DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Bose retailer or

other qualiﬁed professional for removal.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other

relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete

declaration of conformity can be found at: www.Bose.com/compliance

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in

compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU)

No. 801/2013.

Required Power State Information

Power Modes

Standby Networked Standby

Power consumption in speciﬁed power mode, at

230V/50Hz input

≤

0.5 W N/A*

Time after which equipment is automatically

switched into mode

< 2 hours N/A*

Power consumption in networked standby if all wired

network ports are connected and all wireless network

ports are activated, at 230V/50Hz input

N/A N/A*

Network port deactivation/activation procedures.

Deactivating all networks will enable standby mode.

Bluetooth

: Deactivate by clearing the pairing list by pressing and

holding the Bluetooth button for 10 seconds. Activate by pairing with a

Bluetooth source.

*product does not utilize a networked standby mode for a Bluetooth®

connection and does not have the ability to be conﬁgured to a network

via Wi-Fi® or Ethernet

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bose Soundlink Color II Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bose Soundlink Color II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info