Bedienungsanleitung Bose T8S TONEMATCH (Seite 24 von 48) (Englisch)

704842

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

24 - English

Operation

Using the KickGate

The KickGate is a Bose® proprietary technology that allows you to raise the level of a kick drum channel while

eliminating the risk of feedback from the microphone. Two KickGate settings are available in the Comp/Gate

menu.

1. Connect the appropriate type of microphone.

2. Select an appropriate ToneMatch® preset.

3. Adjust the channel input Trim control until the hardest kick drum hits turn the input channel LED red, then

continue to adjust the control until the LED turns green. This optimizes your channel input Trim level.

4. Select Comp/Gate with the rotary selector.

5. Rotate the Type control to scroll down the list, highlight KickGate 1: Regular or KickGate 2: Fast, and

press Select. Choose KickGate 2 when using a double bass drum pedal.

6. While playing the kick drum, increase the volume to the desired performance level.

7. Play the kick drum at the softest level you intend to use in the performance and check that you can hear it.

8. While playing softly, increase the Thresh level until some of the kick drum hits get cut o. Then lower the

Thresh level by 3 dB.

9. While playing the kick drum normally, rotate the Tight control counter-clockwise to reduce the tightness

and add more “boom” to the sound. Tightness can be adjusted from 0% (slowest) to 100% (fastest).

E. De-Esser – Side-chained compressor featuring a preset compression ratio with variable threshold and

gain parameters. Designed to reduce sibilance on vocals.

F. Noise Gate – Noise gate with a fast preset attack time, variable threshold, and variable speed (release

time). Well-suited for eliminating unwanted noise from microphones and instruments.

G. KickGate 1: Regular – Gate featuring a preset attack time, and variable threshold and tightness

(release time) parameters. This is a Bose® proprietary technology designed speciﬁcally for kick drums.

This robust gate provides maximum gain before feedback, making your kick drum as loud as possible

through an PA system.

H. KickGate 2: Fast – Same as KickGate 1 but adjusted for faster tempos. Select this setting if you are

using a double bass drum pedal.

2. Press the Select control to select your choice, or press the Cancel control to exit the list with no change.

3. Compressor 1-3, Limiter, De-Esser: Rotate the Thresh control to adjust the input threshold (trigger) level

from –50 dB to 0 dB. Rotate the Gain control to adjust the gain from 0 dB to 30.0dB. The gain bar above

the control shows the amount of gain reduction. This display helps in setting the threshold.

Noise Gate: Rotate the Thresh control to adjust the input threshold (trigger) level from –90 dB to –30 dB.

Rotate the Speed control to set the gate closing speed to any value from 0% (fastest) to 100% (slowest).

Rotate the Ramp control to adjust the slope of the gate from 0% (horizontal) to 100% (vertical).

KickGate 1-2: Rotate the Thresh control to adjust the input threshold (trigger) level from –20dB to 0 dB.

Rotate the Tight control to adjust the tightness (how quickly the gate closes) from 0% (slowest) to 100%

(fastest).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bose T8S TONEMATCH Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bose T8S TONEMATCH

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info