Bedienungsanleitung Boso Bosotherm Flex (Seite 6 von 12) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

704341

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

PURPOSE

Determination of body temperature of persons

TURNING ON THE THERMOMETER

The device must be installed and put into operation

in accordance with the instructions in this manual.

To get help concerning usage or maintenance plea-

se contact your dealer or the manufacturer.

An unexpected operating condition or an incidence

which has worsened the health condition or could

have worsened the health condition should be

reported to the manufacturer immediately.

To turn on the thermometer, push the ON/OFF-button

next to the display; a short signalling tone [beep] in-

dicates «thermometer ON.» A so-called LCD-test

automatically takes place to check the display. Then

«---» and a flashing «°C» appear on the upper right of

the display, if the ambient temperature is less than

32°C. Now the thermometer is ready for use.

USING THE THERMOMETER

During a measurement, the temperature is displayed

continuously and the «°C» symbol flashes. If the sig-

nalling tone sounds (beep-beep-beep-beep 10 times)

and the «°C» no longer flashes the measurement is

completed (the measured increase in temperature is

now less than 0,1 °C in 8 seconds).

To extend the lifetime of the battery, turn off the ther-

mometer after usage by pressing the ON/OFF-button

briefly. Otherwise the thermometer will automatically

turn off after about 10 minutes.

REVIEWING THE LAST MEASUREMENT

Press ON/OFF button for 2 seconds, when turning on

the thermometer. The last measurement will be di-

splayed together with a «M» for memory.

After 2 seconds, the thermometer will automatically

switch off.

CLEANING AND DISINFECTING

For cleaning of the instrument please use isopropyl

alcohol (70%). For disinfecting wipe the instrument

completely with Antifect Liquid (please obey 5 min.

work-in-time).

CHANGE OF BATTERY

As soon as the symbol «

▼▼

» appears on the display,

the battery is weary and a new battery has to be in-

serted. Open the cover of the battery compartment

and insert the new battery with «+»symbol facing up-

wards.

TECHNICAL SPECIFICATIONS

Maximum thermometer

Measuring range: 32.0°C to 42.9°C

Temp.< 32.0°C:display «---» for low (too low)

Temp.> 42.9°C:display «H» for high (too high)

Accuracy: ± 0.1°C between 34°C and 42°C at an am-

bient temperature of 18°C to 28°C

Operating conditions: environmental temperature

+10°C to +40°C, relative humidity 15 to 95%

Self-test: automatic internal check at a test value of

37.0°C; if there is a deviation of >0.1°C, «ERR» (error)

is displayed.

Liquid crystal display (LCD) with three digits. Smallest

unit of display: 0.1°C

Signalling tone sounds when thermometer is ready

for use and when measurement is completed.

Memory: automatic memory of the last measured va-

lue.

Storage conditions: environmental temperature -

25°C to +60°C, relative humidity 15 to 95%

Battery: 1,5 V, IEC-type LR/SR 41

1,000 measurement cycles (depending on frequency

of use).

Type BF applied part

Norm: EN12470-3, clinical thermometers

Protection against solid objects and water: IP67 (in ac-

cordance with IEC 60529)

Expected operational lifetime of the equipment: 10

years

WARRANTY

This unit is under warranty for 2 years from the date

of purchase.

Please submit the receipt, invoice or delivery note

when claiming for warranty.

For both, warranty and repair, please send the instru-

ment carefully packed and postage paid either to

your authorized dealer or directly to

BOSCH + SOHN GMBH U. CO. KG

Bahnhofstr. 64

72417 Jungingen – Germany

Warranty and repair work must be undertaken by trai-

ned and authorised personnel. Do not modify this

equipment without authorization of the manufacturer.

CARE FOR THE ENVIRONMENT

Used batteries and defective electronic devices do

not belong into the household waste.

They can be deposited at special centres. Please

contact your local authorities for information.

IEC 60 417-53 33

YPE BF APP LIED PART

boso_bosotherm_flex_kpl_1902sd.qxd:boso_bosotherm_flex_kpl_805 12.02.2019 12:41 Uhr Seite 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boso Bosotherm Flex Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info