Bedienungsanleitung Boss BV9370NV (Seite 13 von 19) (Englisch)

497136

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

INSTRUCTIONS INSTRUCTIONS

Radio Function Operation

Enter/exit

Touch [ RADIO ] icon in the main interface to enter into the radio interface.

Touch icon to return to main interface, and then touch other function icons so as to exit

radio mode.

Click icon on setup interface to access audio setting interface, as shown in

diagram:

right(PIC 1)

Audio setting

You can turn on or turn off the existing functions on audio setting interface.

Steering wheel setting

II.Connect anode and cathode of direction control wire of the car with anode and cathode of

direction control wire of this device, and press the buttons on steering wheel one by one

and record the corresponding sequence and functions, then click [Allocation].

III. Click the button of steering wheel needs to be allotted so as to select the corresponding

setting function, such as volume +.

I. Click icon on setup interface so as to access steering wheel setting interface.

IIII. Buttons on steering wheel shall display the corresponding functions, such as volume + .

To reset functions, click [Reset] icon, all the settings set before shall be cleared, repeat

procedures 3~4 for resetting.

To modify function settings, repeat procedures 3~4. Click [Enter] to save the settings.

Touch calibration

If touch calibration error occurs, you can adjust the touch coordinate by “Touch calibration”.

Click icon on setup interface, input password [888888] to confirm to access touch

calibration interface, as shown in below diagram:

Touching methods

Use touch pen to click the center of “+” icon, and move along with center of “+” icon so as

to calibrate the screen. It shall automatically save data and exit after screen calibration.

Please accurately click all positions on screen, or the accuracy of touch calibration shall be

affected.

PIC 1

AF: touch the button to turn on/off AF mode.

TA: touch the button to turn on/off TA mode.

PTY: touch the button the screen displays program types, users can search station

according to program type.

NOTE: If the unit does not have RDS function, it has no AF/TA/PTY function,

Touch the

corresponding icon had no effect

Click [ ] icon so as to switch among AM1, AM2 bands.FM1,FM2, FM3,

Band selection

Search/Save radio stations

Short touch the [ / ] button , single-step reverse / forward adjustment FM / AM

reception frequency;

Long touch the [ / ] button, automatic reverse / forward search for FM / AM radio.

Short touch the [ ] button, browse 1-6 sets of bits stored on the radio, Long touch the

[ ] button to long-automatic station search,and the strongest radio signals P1-P6 are

stored in the display position on the table.

Play radio station selection

Touch [ ] icon pop-up selection sets the keyboard input radio frequency selectable

radio frequency spectrum or you can drag directly touch the icon to select a stored radio

station.

Other Functions

Touch [ ] icon to access sound setting interface.

Touch [ ] icon so as to turn on/off loudness function.

Touch [ ] icon so as to turn on/off Long/Short-Range function.

Touch[ ] icon to turn on/off stereo.

Each band can be stored six radio stations, radio stations can be stored directly click

(P1-P6) choice, and will be displayed on the screen.

Operation stored radio

Select a band, and then select a radio station. Press and hold button (P1-P6) to select the

preset number will appear in the corresponding number button on the screen.

How to save radio stations

RDS function provides series information (such as traffice information, name of station) ,

and can automatically switch to the station with stronger signal andcarries the same

program.

RDS Function

PTY

TA AF

GPS Navigation Function Operation

In tune

Among tall buildings At the boulevard The antenna is sheltered Underground parking Overpass or viaduct

Navigation Function Operation

For detailed operation of navigation function, see “Navigation Operation Manual”.

Receiving signal error

When the satellite signals can be normally received, the error of standard GPS shall be

about 7 meters. Driving on parallel sections,there shall be error even the product has

auto-correct function. The normal receiving of satellite signals shall be affected and cause

error in following environment:

Other functions

Rear view function

In any running state, the video signal can switch to reverse video state when reversing the

car, and the system shall return to its initial running state after reversing the car.

Do not rely on CCD system completely, please make sure your car is safe by your eyes

during driving.Back rearview system only assists in driving. As the distance range of

rearview system is limited, completely relying on the rearview system during driving may

cause accidents.

Reverse field simulation

Rearview backup image

Warning

Navigation system can keep receiving eight satellite signals.

As a general rule, the navigation system can figure out your

accurate location after received 3-4 satellite signals.

But sometimes, weather and tall buildings in the city shall affect the signal receiving

effect, as is shown in following figure:

Satellite receiver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boss BV9370NV Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Boss BV9370NV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info