7
Bluetooth Hands-free System:
1. Pairing and Connection
1) Turn on the Bluetooth mode of the mobile phone;
2) Select Finding the Bluetooth Device. After searching is finished, it will show the name of the
Bluetooth Device available. Select it and switch to the interface for password,
Input the password 0000 and enter it. Then it will show pair OK.
3) For some mobile phones, they can automatically connect with the BT device of the car audio system
and after pairing is ok; for some mobile phones, they need to select the paired BT device and press the
CONNECTION button. When connection is OK, the LCD of the car audio system will show CONNECT.
2. Use the mobile phone to do connection or disconnection
A) Use the mobile phone to do connection or disconnection
1) In the connection status, find the paired and connected Bluetooth Device, then press the
disconnection button to do disconnection.
2) In the disconnection status, find the paired and disconnected Bluetooth Device, then press the
connection button to do connection.
B) When turning on the power again (after Acc off), the front panel can search the phone that was paired
automatically and be connection. And it will take you about 10-15 seconds.
Note:
In the connection status: Mobile phone transfers to the car audio whenever a dialing
takes place; Mobile phone transfers to the car audio whenever receiving a call.
3. Dialing when in connection status
A) Dial with the mobile phone directly.
B) After inputting the phone number via mobile phone, press the TEL button to execute the dialing.
Notes: The talking time will appear on LCD if dialing is successful and it is received.
4. Accept/ End Call
A) During ringing, press TEL button to accept the call
B) During talking, press HANG UP button to end the call.
5. Talking volume level setting
At talking status, use the VOL knob to adjust the sound output, but this volume level can’t
be reserved.
6. To transfer the audio of a file played by Mobile Phone to the Car Audio Player
If the mobile phone supports A2DP and could play audio or video files, when the Mobile Phone plays an
audio (For some Mobile Phones, you must select Play by BT firstly), the playing will be transferred to
the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile Phone support AVRCP, the functions of the >>|, |<<
and PLAY/PAUSE buttons are the same as one in disc mode(no fast forward /backward functions for
the >>|/|<< buttons). The other buttons available in disc mode are not available.
