Bedienungsanleitung Bostitch MRC6 (Seite 11 von 118) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

721838

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

ADJUSTING OPERATING PRESSURE

You do not have to use the maximum operating pressure at all times. On the contrary, the pneumatic tool being used

often requires less pressure. On compressors supplied with a pressure reducer, operating pressure must be correctly

adjusted.

Adjust pressure to the required value by turning the knob clockwise to increase pressure and anti-clockwise to reduce

it. When you have obtained optimum pressure, lock the knob by pressing it downward (fig. 7). For pressure reducers

equipped without a pressure gauge, the set pressure can be seen on the graduated scale located on the reducer body.

On pressure reducers equipped with a pressure gauge, pressure can be seen on the gauge itself.

WARNING: Some pressure regulators do not have “push to lock”, therefore simply turn the knob to adjust the pressure.

STOPPING THE COMPRESSOR

Turn or press the switch/button into position “0” (according to the type of pressure switch fitted on the compressor).

DO NOT turn off the unit by switching off at the socket or pulling out the plug.

MAINTENANCE

Before attempting any maintenance jobs on the compressor, make sure of the following:

- Master power switch in position “0”.

- Pressure switch and the control unit switches all off, in position “0”.

- No pressure in the air tank.

You are recommended to replace the filter element at least once if the compressor operates in a clean environment,

but more frequently if in a dusty environment (fig. 8).

The condensation in the tank must be drained at least once a week, by opening the drain tap (fig. 9) under the

tank. Take care if there is compressed air inside the cylinder, and water could flow out with considerable force.

Recommended pressure: 1-2 bar max.

1. Verify that the compressor is turned “Off”.

2. Holding the handle, tilt the compressor toward the drain valve so it is positioned at the bottom of the tank.

3. Turn the drain valve to open.

4. Keep the compressor tilted until all moisture has been removed.

Condensation of compressors that are oil lubricated must not be drained into the sewer or dispersed in the

environment as it contains oil.

OIL CHANGES - TOPPING UP WITH OIL (C24 / C24-U110 / C50 / PS20 / PS20-U110 only)

The compressor is filled with synthetic oil “SAE 40”.

We recommend a full change of oil in the pumping element within the first 100 hours of duty.

Unscrew the oil drain plug on the housing cover, allow all the oil to flowout, and re-screw the plug (fig. 10). Pour oil into

the upper hole of the housing cover (fig. 11) until it reaches the level indicated on the stick (fig. 3).

Once a week: check oil level of the pumping element (fig. 3) and see if it needs topping up. For operation at ambient

temperature in the range -5°C to +40°C, use “SAE 40” synthetic oil. The advantage of this oil is that is does not lose its

characteristics either in winter or summer. Do not drain used oil into the sewer or dispose of it in the environment.

OBSERVE THIS TABLE FOR OIL CHANGES

TYPE OF OIL HOURS OF DUTY

Synthesis..............................................500

Synthetic oil: .......................................300

(MOBIL, SHELL, ESSO, BP or OTHERS)

Other types of oil: mineral multigrade

SAE 15 W40.........................................100

WHAT TO DO IF SMALL MALFUNCTIONS OCCUR

Loss of air in valve under pressure switch

This trouble depends on poor tightness of the check valve. Take the following action:

- Discharge all pressure from the tank

- Unscrew the hexagon-head of the valve

- Carefully clean both the rubber disk and its seat.

- Refit all parts accurately.

GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE

compliance for the products.

FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en

rien que les produits soient conformes aux normes CE.

DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht

die CE-Richtlinien für Produkte.

NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet

zeggen dat de producten voldoen aan de CE-vereisten.

DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for

produkterne.

FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-

yhdenmukaisuutta.

GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος

εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.

IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la

conformità CE per i relativi prodotti.

NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-

merking for produktet.

PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em

conformidade com a CE para os produtos.

ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la

conformidad con las normas CE de los productos.

SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la

conformidad con las normas CE de los productos.

PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie

stanowią deklaracji zgodności CE prezentowanych produktów.

CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie

stanowią deklaracji zgodności CE prezentowanych produktów.

SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané

výrobky.

HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti

a termék CE-megfelelőségét.

RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă

conformitatea CE pentru produse.

Bostitch MRC6 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info