This symbol found on the apparatus
indicates that the apparatus must
be placed in a separate collection
facility for electronic waste and not
disposed with household waste.
This sym
indicates double insulation.
Warning!
electrical shock
apparatus to rain or moisture.
This symbol found on the apparatus
indicates hazards arising from
dangerous voltages.
This symbol found on the apparatus
indicates the user should read all
safety statements found in the user
manual.
American Users:
Note:
found to comply with the limits f
digital device, pursuant to part 15 of the FCC
Rules.
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However
no guarantee that interference will not occur
in a particular installation. I
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the inter
one or more of the following measur
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweenthe
equipment and receiver
• Connecttheequipmentintoanoutleton
a circuit differ
receiver is connected.
• Consultthedealeroranexperiencedradio/
T
Caution: Unauthorized changes or
modifications to the receiver could void user’
authority to operate the equipment.
Canadian Users
This class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de classe B est conforme
á la norme NMB-003 du Canada.
CAUTION:
a Class 1 LASER system.
of this product, please read this user’s guide
carefully and retain f
the unit require maintenance
Acoustics authorized service center.
Use of controls, adjustments or the performance
of procedures other than those specified herein
may result in hazardous radiation exposur
T
try to open the enclosure. V
may be present when the enclosure is opened
Do not stare into beam.
Location of Certification and
Identification Label
IMPORT
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follo
5. Do not use this apparatus near water
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer
8. Do not install near any heat sources such
as radiators, heat reg
apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than the other
type plug has two blades and a third
grounding prong
third prong is pro
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Prot
walked on or pinched par
plugs, convenience r
point where they exit from the apparatus.
11. Onlyuseattachments/accessories
specified by the manufacturer
12. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
13. Refer all servicing to qualified ser
personnel. Servicing is required when
the apparatus has been damaged in any
way
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally
has been dropped.
14. Maintain a minimum distance of 2”
(50mm) around the front, rear
of the apparatus for sufficient ventilation.
The ventilation should not be impeded
by covering the ventilation openings or
placing on or around the apparatus items
such as newspapers, table-
etc.
15. No open flame sources, such as lighted
candles, should be placed on the
apparatus.
16. The apparatus shall not be exposed to
dripping or splashing. No objects filled
with liquids, such as vases, shall be placed
on the apparatus.
17. Either the power inlet connector on the
rear of the apparatus or the power plug
at the wall must remain accessible, to
be able to disconnect power from the
apparatus.
18. T
from the AC Mains, disconnect the power
supply cord plug from the AC r
19. The mains plug of the power supply cord
`shall remain readily operable.
Optional: Connecting to a cable
Y
your cable company offers an F
your
will accept the cable FM feed fr
T
connect your radio to the FM signal a
from some cable
cable
any connection.
Be sure that the installation includes a splitter
that filters the signal to prevent an
of the
FM band, not the cable
to the
Notice for Cable
Please make note of Article 820-40 of the NEC
(of USA) that provides guidelines for pr
grounding. In particular
that the cable ground shall be connected to the
grounding system of the building
point of cable entry as is pracCA
When making connections to the rear of the T
it is possible to experience an ESD (Electrostatic
Discharge) event. If this happens, simply push
theOn/offbuttononthefrontandrecheckthe
preset settings.
Optional: Connecting to an outdoor antenna
If you wish to use an outdoor antenna, we
suggest that, for safety reasons
professional installer connect it.
Grounding Clamps
Antenna Grounding
Example of antenna grounding per
the National Electrical Code,
ANSI/NFPA 70
Antenna
Lead In Wire
Ground Clamp
Ground Conductors
(NEC Section 810-21)
Electrical Ser
Antenna Discharge Unit
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC ART 250 Part H)
Antenna Grounding
Example of antenna grounding per the
National Electrical Code, ANSI/NFP
Antenna Lead In
Wire
Ground Conductors
(NEC Section 810-21)
Ground Clamp
Grounding Clamps
Antenna Discharge Unit
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC ART 250 Part H)
Electrical Service Box
bottom of unit
Horizon T
™
®
AQD 000101
This device complies with Part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
This Class B digital apparatus complies with Canadian CES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
Complies with 21 CFR Chapter I, Subchapter J
Boston Acoustics, Inc.
Peabody, MA USA
Designed in USA
Made in China
Complies with 21 CFR Chapter I,
Subchapter J
Designed in USA
Made in China
Boston Acoustics, Inc
Peabody
142-003136-0_Trio_OM_Internal .indd 2 9/23/08 3:56:33 PM
