Bedienungsanleitung Boston Acoustics horizon trio (Seite 10 von 15) (Englisch)

160816

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Remote Control iPod Operation

Press the

button to play or

pause the CD.



Press the

]

button once to

skip to the next track. Press the

[

button once to return to the

beginning of the current track or

twice to go to the previous track.



Press and hold the

[

]

button to start fast forward or

rewind.

 

Alarm Clock Features

The Horizon Trio has two independent alarm settings. Each can have its own type of alarm —wake to tone, wake to music

or both. Both types of alarms start at a low volume level that gently increases. In addition you can set the alarms to work

every day, weekdays only or weekends only.

Setting the Alarm Time

Press and hold the ALARM 1 or ALARM 2 button for one second to access the “Alarm1 Setup”

or “Alarm2 Setup” menu.

Turn the MODE control to highlight “Alarm Time”, then press the control to select it. The

time highlight box will ash.

Turn the MODE or TUNE control to adjust the Alarm Time, then press the control to set the

Alarm Time.

Notes: The Alarm Setup menu can also be by accessed using the

MODE control to select the

Setup Options menu then selecting Alarm 1 or Alarm 2 .

If an alarm source other than the CD player is selected, the CD Track # line of the display will show NA rather than a

track number.

Theothersettingareadjustedthesameway:accessthe“AlarmSetup”menu;turnthe

MODE control to select the item to

adjust,thenpressthecontrol;turnthe

MODE or TUNE to adjust the setting, then press the control.

Active Days: Weekdays/Weekends/7Days – Choose which days you want to use the alarm.

Source – Choose the wake to music source you want. You can select a station you have tuned in with the AM, FM1 or

FM2 sources, any of the AM or FM presets, a CD, or your iPod connected via the HRD-i docking adapter. Note: If you

select a source that is not available, for example if you select a CD source and there is no disc loaded, a wake to tone

alarms sound instead.

CD Track# – If you select a CD for the wake to music source, use this setting to select the track to play.

Volume – Set the volume for wake to music.

After you have completed the alarm setup turn the

MODE or TUNE control to highlight “Exit” (below Volume) and press the

control. Or just wait a few seconds and the menu will “time out” and store the settings.

Turning Alarms On or O

PresstheAlarm1orAlarm2buttonstoturnthealarmonoroandsetthealarmtype.One

press selects wake to music XXX. A second press selects wake to tone XXX. A third press

selects both. Press the button a fourth time to cancel the alarm. When an alarm is turned on

you’ll see one or both alarm indicators in the lower corners of the display showing the alarm

time and type.

This example shows the display with the Trio turned off and both alarm on. The current time is displayed. Alarm 1 is set for

wake to tone at 6:45 AM. Alarm 2 is set for wake to music and tone at 7:15 AM.

142-003136-0_Trio_OM_Internal .indd 10 9/23/08 3:56:51 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Boston Acoustics horizon trio Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info