Bedienungsanleitung Bourgini 22.5041 (Seite 9 von 24) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

773421

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• Engine driven appliances: beware of sharp and/

or moving parts. Always keep your hands away

from the moving parts when using, cleaning or

servicing the appliance.

• Heating devices: wait until the appliance has

cooled down before you touch the housing and

parts of the unit.

Be extra careful during cleaning and servicing.

HYGIENE

In order to avoid contamination with bacteria via raw

meat, ﬁsh or poultry, it is important to handle these

ingredients carefully during the preparation process.

There are a number of things you should be aware of.

Hand washing

• Be sure to wash your hands regularly, especially

before preparing food, after touching raw

ingredients and before eating.

• Wash your hands with a liquid soap, for at least 15

seconds. Afterwards it is important that you dry

your hands with a clean towel or paper towel.

During preparation

• When preparing raw ingredients, it is important

that the environment is clean and that you use

a clean cutting board and clean cutlery. Rinse

materials with hot water and soapy water for

next use.

• It is a good idea to use a different chopping board

for vegetables and dough/bread than for raw

ingredients.

• It is important that the cutlery used to handle the

raw ingredients is not used to handle the food once

cooked or baked. It may contain a lot of bacteria,

which can make you sick. Wash the cutlery in

between or use different knives and forks.

• You should also ensure that prepared food does not

come into contact with products that are still raw.

• It is also important to not burn your meat, as this

could cause harmful substances to form.

Serving the meal

• When serving meat, ﬁsh & poultry, make sure

that the prepared food is not placed on the same

plate that the raw food has been in contact with.

INTRODUCTION

This stylish mixer is suitable for all mixing and

blending in the kitchen. With a max 1500 watts

of power and 8 speed settings, this appliance can

handle anything. There are 3 “beaters” included for

all processes. This includes dough, cake batter, egg

whites, cream, sundaes, pizza dough, biscuit dough,

etc. The rubber feet stop the mixer moving while in

use.

The dough hook (6) and the mixing hook (7) are not

dishwasher safe! If you wash them in the dishwasher

anyway, the metal will turn black.

IMPORTANT: SAFETY SWITCHES

This mixer has 2 safety switches:

1. Thermal protection for the motor:

This prevents overheating. If the mixer is used too

intensively the motor will switch itself off. Let the

mixer cool down for at least 10 minutes. Note: if

this does happen, unplug the power cord for a few

minutes so that the safety switch can reset itself,

and turn the speed control to 0. If you do not remove

the plug from the socket and set the switch to 0, the

motor will not switch back on. This prevents the

motor from unexpectedly starting up as soon as it

has cooled down.

2. Safety switch for the mixer head:

When the mixer head is tilted upwards, the motor

will turn off. Set the switch to 0 before tilting the

mixer head back down. After tilting the head, select

the desired speed again to switch the motor on.

OPERATION AND CONTROLS

(see ﬁgure, p.2)

The mixer includes the following parts:

1. Drive shaft for attaching the beaters

2. Lock button for lifting the mixer head

3. Speed control

The speed switch is also the on/off button:

Position 0 = off

Position 1 to 8 = on

4. Cord

5. Stainless steel mixing bowl

6. Dough hook (“beater”)

7. Mixing hook (“beater”)

8. Whisk (“beater”)

9. Splash guard

USE

• Clean the appliance and its parts

(see ‘Maintenance and Cleaning’).

• Place the mixer on a solid surface.

• Open the mixer head diagonally upwards by

turning the lock button (2).

• Place the bowl on the base by positioning

the lugs at the bottom of the bowl next to the

arrow on the base, and then turn the bowl

clockwise.

• Attach the desired “beater” to the drive

shaft by holding the slots on the beater shaft

against those on the drive shaft, pressing the

beater against the spring, and turning it anti-

clockwise until it is ﬁrmly locked in position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bourgini 22.5041 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info