Bedienungsanleitung Bowers Wilkins PV1D (Seite 6 von 193) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

706401

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

ENGLISH

2. Unpacking the Subwoofer 3. Positioning the Subwoofer

The PV1D is heavy and we strongly suggest that it is

unpacked close to its nal working position by two

people working together.

The table above illustrates the component parts that

are packed with the subwoofer.

1 Important safety and warranty information

2 5m USB to mini-jack cable (to connect a computer

when using SubApp)

3 Power cord

4 5m cable (for connection to speaker level input)

5 Microbre cleaning cloth

6 Product registration leaet

In the unlikely event that anything is missing please in

the rst instance contact the retailer from whom you

purchased the subwoofer.

Remove the protective lm from the front of the display.

Environmental Information

This product complies with international directives,

including but not limited to:

i. the Restriction of Hazardous Substances (RoHS) in

electrical and electronic equipment,

II. the Registration, Evaluation, Authorisation and

restriction of CHemicals (REACH)

iii the disposal of Waste Electrical and Electronic

Equipment (WEEE).

Consult your local waste disposal authority for

guidance on how properly to recycle or dispose

of this product.

The PV1D may be used freestanding on the oor or be

installed into custom-built furniture. The positioning of

a subwoofer is generally less critical than for full-range

speakers. Furthermore, the PV1D is also more versatile

than most subwoofers in terms of positioning thanks

to its on-board equalisation and optimisation system

that can compensate to some extent for less than

ideal positioning. Section 5.4 describes use of the

equalisation system.

Best results, however, will be obtained if the PV1D is

placed between the left and right speakers or in the

vicinity of one of them. Placing a subwoofer to the side,

but still to the front of the listeners is an acceptable

compromise if domestic considerations dictate, but we

recommend you avoid placing the subwoofer behind

the listeners. If two PV1D subwoofers are to be used

it is best to position one near the left speaker and one

near the right speaker. The diagram above illustrates

subwoofer positioning.

For all applications, the PV1D rests on its rubber base,

which provides a degree of vibration isolation from the

supporting structure.

 Note:Likeallspeakers,theproximityofroom

 boundariesaffectsthesoundofasubwoofer.Bass

 levelincreasesasmoresurfacescomeintoclose

 proximity.Themoreboostgainedfromtheroom,

 thelowerthesubwoofer’svolumecanbesetand

 thelesshardthesubwooferhastowork.

Using two or more subwoofers in a single installation

can improve performance by averaging the effects of

low-frequency room resonances and enabling a higher

maximum volume level.

Additionally, in the case of two subwoofers used in a

2-channel audio system, stereo separation may be

maintained to the lowest frequencies, but only if each

channel has its own subwoofer located close to the

appropriate satellite speaker.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowers Wilkins PV1D Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info