Bedienungsanleitung Bowers Wilkins PX7 (Seite 6 von 113) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

704642

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

ENGLISH

6. Bluetooth Connection

6.1 Pairing

PX7 is designed to stream media wirelessly from

Bluetooth audio devices, such as smartphones,

tablets or personal computers. To do so, the

headphone and device (source) must rst be paired.

1. The rst time you switch on your headphones,

Bluetooth pairing mode will be enabled,

the indicator will ash blue. If pairing mode

is not enabled, please slide and hold the

power switch to the upper (Bluetooth Icon)

position for 5 seconds, let go when the

indicator blinks blue and when an audible cue

is presented.

2. Ensure the Bluetooth feature is enabled on the

audio device, PX7 will appear in the discovery

list, select it to pair.

3. The indicator will ash blue while pairing is

in progress, this will change to solid blue

and an audible cue presented when pairing

is successful.

Your headphones will remember up to eight paired

Bluetooth devices. Repeat the above steps to pair

more devices.

Note: Your headphones will automatically exit

Bluetooth pairing mode if no device is paired

within 5 minutes. If pairing fails, the indicator will

rapid ash blue, please try pairing again.

6.2 Multiple Bluetooth Connections

PX7 can connect up to two devices at the same

time, but note that you can only play audio or take

calls from one device at a time.

To switch between two devices:

1. Pause audio on the rst device, or use the

PX7 multi-function button.

2. Play audio from the second device and the

headphone will switch over.

When streaming audio, receiving a call on the

second device will automatically pause playback

and the call will be routed automatically to your

headphones. Ending the call will automatically

resume playback from the rst device.

6.3 Disconnect from a Device

You can quickly disconnect PX7 from a device by

sliding the Power Switch to the upper (Bluetooth

Icon) position two times in quick succession, an

audible tone will be presented indicating successful

disconnection.

Alternatively, you can manage connection in further

detail using the Bowers & Wilkins Headphones app

under Connections.

6.4 Setting Up Headphones with the App

The Bowers & Wilkins Headphones app provides

extended setup and adjustments to features such as

Adaptive Noise Cancellation, Ambient Pass-Through,

and Wear Sensors. The app also provides further

customisations such as voice prompt, standby time,

connection management and headphone software

updates. The app is available as a free download on

iOS and Android devices.

To add your headphones:

1. From your mobile device, download and install

the Bowers & Wilkins Headphones app.

2. Launch the app, then read and follow

the instructions pertaining app notication

and permissions.

3. After reaching the main screen, simply tap +

and following the in-app instructions.

6.5 Headphone Software Updates

Bowers & Wilkins will occasionally make available

software updates that rene and optimise the

performance of your headphones or add

new features.

The Bowers & Wilkins Headphones app will notify

you when a software update is available, tap on the

notication and the follow in-app instructions.

Diagram 7

Bluetooth pairing

Devices

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowers Wilkins PX7 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bowers Wilkins PX7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info