Bedienungsanleitung Bowflex BXE226 (Seite 49 von 64) (Englisch)

737201

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Assembly / Owner’s Manual

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the necessary tasks.

Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular maintenance is

done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer supplied components can be

used to maintain and repair the equipment.

If at any time the Warning labels become loose, unreadable or dislodged, contact your local distributor for replacement labels.

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from

the wall outlet and/or the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a

secure location.

Daily: Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not use if found in this condition.

Repair or replace all parts at the rst sign of wear or damage. After each workout, use a damp cloth to wipe your machine and

Console free of moisture.

Note: Avoid excessive moisture on the Console.

Weekly: Check for smooth roller operation. Wipe the machine to remove dust, dirt, or grime. Clean the rails and surface of the rollers with a

damp cloth.

Apply silicone lubricant to a dry cloth and wipe the rails to eliminate roller noise.

Silicone lubricant is not intended for human consumption. Keep out of reach of children. Store in a safe place.

Note: Do not use petroleum based products.

Monthly or after 20 hours: Make sure all bolts and screws are tight. Tighten if necessary.

NOTICE: If necessary, only use a mild dish soap with a soft cloth to clean the Console. Do not clean with a petroleum based solvent,

automotive cleaner, or any product that contains ammonia. Do not clean the Console in direct sunlight or at high temperatures

Be sure to keep the Console free of moisture.

Replace Batteries in Chest Strap

The heart rate (HR) chest strap uses a CR2032 battery.

Do not perform this procedure outdoors or in moist or wet locations.

1. Using a coin, loosen the slotted cover on the battery bay.

Remove the cover and battery.

2. When replacing the battery, insert it in the battery bay with the +

symbol facing up.

Note: The chest strap uses CR2032 size batteries.

3. Reinstall the cover on the strap.

4. Discard the old battery. Dispose of in accordance with local

regulations and/or at approved recycling centers.

5. Inspect your chest strap to ensure function.

Do not use until the equipment has been fully assembled and inspected for correct performance in accordance with the Owner’s

Manual.

Maintenance

CR2032

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowflex BXE226 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bowflex BXE226

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info