Bedienungsanleitung Bowflex BXE226 (Seite 53 von 64) (Englisch)

737201

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Assembly / Owner’s Manual

Condition/Problem Things to Check Solution

Unit rocks/does not sit level Check leveler adjustment Adjust levelers until machine is level.

Check surface under unit Adjustment may not be able to compensate for extremely uneven surfaces.

Move machine to level area.

Foot pedals loose/unit difcult

to operate

Hardware Tightly secure all hardware on the Pedal Arms and Handlebar Arms.

Drive train click/tick noise once

per full crank revolution

Check crank/pulley assembly Disconnect left and right foot assemblies and rotate crank. If sound persists,

replace crank/pulley assembly. If sound does not come from rotating crank,

check foot assemblies and upper/lower handlebars.

Check foot assemblies, leg as-

semblies, handlebar

assemblies

Manually move foot, leg, and handlebar assemblies to isolate sound. Re-

place part making sound.

Check for loose hardware Tightly secure all hardware on the Stabilizers and the base of the Console

Mast.

Knocking sound during machine

operation

Check hardware at junction

between Lower Handlebar Arm

and Pedal

Make sure that the alignment tab on the Pivot Sleeve goes into the slot in the

hole. Be sure the Pivot Sleeve extends through the opposite hole in the joint

cover.

Squeaking noise that appears a

few minutes into a workout and

normally will get progressively

worse as the workout continues

Bolt that connects the swing

arms to the axle running through

the console mast

Loosen pivot rod bolt slightly until noise goes away. White lithium grease can

also be applied for a temporary x. Contact your local distributor for assis-

tance.

Roller squeaking on rail Apply silicone lubricant to a dry cloth and wipe the rails to eliminate roller

noise.

Console continuously displays

a different program every 15

seconds

Console is in demonstration

mode

Push and hold down the ENTER and PAUSE/ENTER buttons for 3 seconds.

Workout results will not sync

with Bluetooth

enabled device

Current console mode Machine must be in Idle Mode to sync. Push the PAUSE/STOP button until

the Power-Up Mode screen is displayed.

Total time of workout A workout must be longer than 1 minute to be saved and posted by the

Console.

Fitness machine Unplug unit from electrical outlet for 5 minutes. Reconnect to outlet.

Bluetooth

enabled device Consult your device to be sure that the Bluetooth

wireless feature has been

enabled on it.

Fitness App Review Specications of Fitness App and conrm your device is compatible.

Contact your local distributor for further assistance.

Workout results not posting to

Bowex Connect™

Fitness App on Bluetooth

enabled device

Workout results transfer from the machine to the App, and then post to the

Bowex Connect™ website. Review account and password for the Bowex

Connect™ website.

Contact your local distributor for further assistance.

Workout results not posting

from Bowex Connect™ to

MyFitnessPal

account

Sync accounts From the Menu icon on the Bowex Connect™ website, select the Sync to

MyFitnessPal

Sync fails Review account and password for MyFitnessPal

Contact your local distributor for further assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowflex BXE226 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bowflex BXE226

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info