Bedienungsanleitung Bowflex BXT226 (Seite 40 von 64) (Englisch)

737190

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Assembly / Owner’s Manual

Select a User Prole

Every workout is saved to the User Prole and can be reviewed with the online health tracker at www.bowexconnect.com. Be sure to select the

proper User Prole before starting a workout. The last User that completed a workout will be the default User.

User Proles are assigned the default values until they are customized by editing. Be sure to edit the User Prole for more accurate calorie and heart

rate information.

Edit User Prole

1. From the Power-Up Mode screen, push the User button to select one of the User Proles.

2. Push and hold down for 3 seconds the User button to edit the User Prole.

3. The Console display shows the Gender prompt and the current value.

Push the Increase or Decrease buttons to change the displayed Gender value, and push the Enter button to accept the displayed value.

Note: To exit the User Profile options, push the PAUSE/STOP button and the console will go back to the Power-Up Mode screen.

4. To edit the other User data (Age, Display Units, Weight, and Screen Brightness) use the Increase/Decrease buttons to adjust, and push Enter to

set each option.

Note: To return to the previous prompt push the Left, or Back, arrow button.

5. The Console display shows the Erase Workouts prompt and the current value ( “NO” ). To erase all workouts for the selected User, push the

Increase () or Decrease () button to change the value to “YES”, and push Enter. The Console will now conrm if the User wants to erase the

workouts. Use the Increase () or Decrease () button to change the value to “YES”, and push Enter. The workouts for this User have been

erased.

6. The Console display shows the conrmation screen for two seconds, and then will go to the Power-Up Mode screen

Workout Programs

Each Workout Program has 30 columns allowing for a variety of workouts. For each Workout Program, the Workout Segment display either shows

incline (Incline Program) or speed (Speed Program) columns. For a Speed Program, when a workout starts the Console will ask for the maximum

speed. Use the Increase/ Decrease buttons to adjust the value, and press START to accept and begin the workout.

As each column is done, the Console hides it so only the remaining columns are visible. The user can also manually adjust the incline and speed

values at any time during a workout.

During a Prole Program workout, the Console will make an audible beep when the next segment of the workout occurs. Be

prepared for changes in Incline and Speed with each segment change.

If the Sound has been muted, the Console will display the “AUDIO OFF” prompt for a few seconds.

Manual

(Speed Program - open-ended workout, 1 minute each column)

Note: maximum time is 99:59.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowflex BXT226 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bowflex BXT226

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info