Bedienungsanleitung Bowflex BXT226 (Seite 53 von 64) (Englisch)

737190

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Assembly / Owner’s Manual

Troubleshooting

Condition/Problem Things to Check Solution

No display/partial display/unit

will not turn on

Check electrical (wall) outlet Make sure unit is plugged into a functioning wall outlet. Test the outlet with a

known functioning device such as a lamp.

Check connection at front of unit Connection should be secure and undamaged. Replace power cord or con-

nection at unit if either are damaged.

Power Switch Turn on the power with the Power Switch

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or cut, replace

cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly. Small latch on

connector should line up and snap into place.

Check console display for

damage

Check for visual sign that console display is cracked or otherwise damaged.

Replace Console if damaged.

Console Display If Console only has partial display and all connections are ne, replace the

Console.

If the above steps do not resolve the problem, contact your local distributor

for further assistance.

Unit operates but Contact Heart

Rate (HR) not displayed

Sensor grip Be sure hands are centered on HR sensors. Hands must be kept still with

relatively equal pressure applied to each side.

Dry or calloused hands Sensors may have difculty with dried out or calloused hands. A conductive

electrode cream (heart rate cream) can help make better conduct. These are

available on the web or at medical or some larger tness stores.

If tests reveal no other issues, contact your local distributor for further as-

sistance.

Unit operates but Telemetric HR

not displayed

Chest Strap Strap should be “POLAR

” compatible and uncoded. Make sure strap is

directly against skin and contact area is wet. Make sure the transmitter has

the curve oriented upward.

Check User Prole Select the Edit User Prole option for the User Prole. Go to the WIRELESS

HR setting and make sure that the current value is set to ON.

Interference Try moving unit away from sources of interference (TV, Microwave, etc).

Replace Chest Strap If interference is eliminated and HR does not function, replace strap.

Replace Console If HR still does not function, contact your local distributor for further assis-

tance.

Speed display is not accurate Display set to wrong unit of

measure. (English/Metric)

Change display to show correct units.

Speed does not adjust (machine

turns on and operates)

Check Console Check for visual sign that Console is damaged. Replace Console if damaged.

Lower and Upper I/O Cables

(requires console removal)

All wires in the cables should be intact. If any are cut or crimped, replace

cable.

Drive Belt Check to be sure drive belt is around drive pulley and motor; inspect tension.

If the above steps do not resolve the problem, contact your local distributor

for further assistance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowflex BXT226 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bowflex BXT226

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info