Bedienungsanleitung Bowflex Max Total (Seite 42 von 56) (Englisch)

737205

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Assembly / Owner’s Manual

Troubleshooting

Condition/Problem Things to Check Solution

No display/unit will not turn on Console in sleep mode Move handlebars to wake up Console.

AC Adapter Check for visual sign that AC Adapter is cracked or otherwise damaged.

Replace AC Adapter if damaged.

Check electrical (wall) outlet Make sure unit is plugged into a functioning wall outlet.

Check connection at front of unit Connection should be secure and undamaged. Unplug connector and

inspect inlet for any damade. Plug connector back into inlet.

Check Status LED and Status

LED Ring

If Status LED and Status LED Ring are:

- on (solid), then the Console is starting up. May take up to 3 minutes.

-brieyturnsoffevery2seconds,thenthebatteryisinitialchargingfor60

minutes

-blinkingquickly,thenConsoleisexperiencinganerror.Disconnectpowerto

machine for 30 seconds, and then reconnect it.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly. Small latch on

connector should line up and snap into place.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or cut, replace

cable.

Check console display for

damage

Check for visual sign that console display is cracked or otherwise damaged.

Replace Console if damaged.

If the above steps do not resolve the problem, contact Customer Service (if

inside US/Canada) or your local distributor (if outside US/Canada).

Resistance does not change

when Resistance Level Knob is

rotated during workout

Check data cable integrity from

Console Button Assembly to

Console

All wires in cable should be intact. If any are visibly crimped or cut, replace

cable.

Check data cable

connections/orientation

Be sure cable is connected securely and oriented properly. Small latch on

connector should line up and snap into place.

Check Console display for

damage

Check for visual sign that console display is cracked or otherwise damaged.

Replace Console if damaged.

If the above steps do not resolve the problem, contact Customer Service (if

inside US/Canada) or your local distributor (if outside US/Canada).

No speed/RPM reading/

Console shuts off (enters sleep

mode) while in use

Check integrity of cables and

wiring harnesses (upper and

lower)

All cables should be intact. If any are cut or crimped, replace the appropriate

cables / wiring harness.

Check all cable connections/

orientation

Be sure all cables are connected securely and oriented properly. Small latch

on connector should line up and snap into place.

Check Speed Sensor (requires

shroud removal)

Speed sensor should be aligned with magnets and connected to data cable.

Realign sensor if necessary. Replace if there is any damage to the sensor or

the connecting wire.

If tests reveal no other issues, contact Customer Service (if inside US/

Canada) or your local distributor (if outside US/Canada).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowflex Max Total Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bowflex Max Total

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info