Bedienungsanleitung Bowflex SelectTech 840 (Seite 10 von 12) (Englisch)

737208

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Problem Solution

Kettlebell handle does not fully

insert into base when no plates

are selected (handle has no plates

attached).

1. Make certain that the adjustment knob is set directly to the number 8.

Kettlebell handle does not fully insert

into base when plates are selected

(handle has plates attached).

1. Verify that the plates not selected (those plates remaining in the kettle-

bell base) are in the correct order and have not been switched. This

may be blocking the kettlebell from fitting back into the base.

Adjustment knob will not turn while

handle is in base.

1. Check to assure that the kettlebell handle is fully depressed into the

kettlebell base. If not fully depressed, the locking mechanism will not

be released and may prevent the adjustment knob from rotating.

2. Check to see if there is any dirt, debris or other obstruction in the

kettlebell base. You may need to remove the weight plates from the

base to accomplish this check. Remember to put each weight plate

back in the correct sequence and orientation.

Troubleshooting / Warranty

Warranty (if purchased in US/Canada)

Who Is Covered

This warranty is valid only to the original purchaser and is not transferable or applicable to any other person(s).

What Is Covered

Nautilus, Inc. warrants that this product is free from defects in materials and workmanship, when used for the purpose intended, under normal conditions,

and provided it receives proper care and maintenance as described in the Product’s Assembly and Owner’s manual. This warranty is good only for

authentic, original, legitimate machines manufactured by Nautilus, Inc. and sold through an authorized agent and used in the United States or Canada.

Terms

• Parts (including hand assembly, weight plates and base assembly) 2 years

For warranty & service of products purchased outside US/Canada, please contact your local distributor. To ﬁnd your local international distributor, go to:

www.nautilusinternational.com or www.nautilus.cn

How Nautilus Will Support the Warranty

Throughout and as set forth under the terms of the Warranty, Nautilus, Inc. will provide a replacement for any component or part that proves to be defective

in materials or workmanship. Nautilus, Inc. reserves the right to substitute material of equal or better quality if identical materials are not available under

this warranty.

In the event that replacement parts or components do not correct the issue, Nautilus, Inc, reserves the right to replace the product or apply a limited credit

reimbursement toward another Nautilus Inc. brand product, at our discretion. Reasonable substitution may be required depending upon Product availability.

Any replacement of the Product under the terms of the Warranty in no way extends the original Warranty period. THESE REMEDIES ARE THE EXCLUSIVE

AND SOLE REMEDIES FOR ANY BREACH OF WARRANTY.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bowflex SelectTech 840 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bowflex SelectTech 840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info