27
EN
2 / INSTALLING YOUR APPLIANCE
••
Recycling
- Calculate the final height for fixing the duct sup-
port U-bracket.(part B Pic. 1)
- Mark the two holes.
- Drill 8 mm diameter holes and secure the duct
support bracket, ensuring that it is fixed in the
same axis as the hood.(part B Pic. 1)
- Fix the flat bracket behind the lower duct.(part C
Pic. 4)
- Place the glass on the guides. Slide the glass in
and secure it with the 4 screws
- Fit the sleeve adapter on the deflector (Pic. 8).
- Connect the extendable sleeve (not included) to
the deflector. (Pic. 8)
- Fit the two parts of the duct on to the hood.
- Fit the deflector (Pic. 8) into the upper duct by the
ventilation inlets (Pic. 6).
- Make the electrical connection to the hood using
the mains supply cable.
- Lift the upper duct up to the ceiling and fix it to the
bracket using the two screws. (Pic. 7)
Tip
For optimal use of your appliance, we recommend that you connect the hood to a 150 mm-diameter flue (not
delivered with the appliance). Minimise the number of angles and bends and the lengths of the flue. In the event
that the hood will be operated using outdoor evacuation, you should ensure a sufficient inflow of fresh air to avoid
a pressure deficiency in the room
.
pic.8
pic.7
