The following table shows which ambient temperature is correct for each climate classification:
If installation next to a source of heat is unavoidable, the following minimum clearances must be main-
tained at the sides of the appliance:
– for electric cookers 3 cm;
– for oil and coal fired ranges 30 cm.
If these clearances cannot be maintained a heat insulating pad is required between the cooker and the
refrigeration appliance.
If the refrigeration appliance is installed next to another refrigerator or freezer a clearance of 5 cm at
the sides is required, in order to prevent the formation of condensation on the outside of the appliance.
47
Climate classification for an ambient temperature of
SN +10 to +32 °C
N +16 to +32 °C
ST +18 to +38 °C
T +18 to +43 °C
Your appliance needs air
Your freezer is designed for maintenance-free operation. What it should never lack is good ventilation.
Air is supplied under the ventilation slot between the freezer and storage surface. Air is extracted
through the upper ventilation grille. Never obstruct these openings.
Electrical Connection
The plug socket necessary for connection of your appliance to the electricity supply should be positioned
so that it is possible to pull out the appliance plug.
A concealed protective contact plug socket requires 10 A/16 A fusing.
If the socket is not accessible, the electrical installation must include suitable means of isolating the
appliance from the mains (e.g. fuse, cut-out, current trip or similar with a minimum contact separation
of 3 mm).
Before initial start-up, refer to the appliance serial plate to ascertain if supply voltage and current values
correspond with those of the mains at the installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
☞
