53
Reversing the door
The side at which the door opens can be changed from the right side (as supplied) to the left side, if the
installation site requires.
Warning! When changing the side at which the door opens, the appliance must not be connected to the
mains. Remove plug from the mains beforehand.
Tilt the appliance slightly towards the rear and prop it
securely.
Unscrew the door hinge screws (K) and remove the hinge
pin bracket (1).
Open the door a little way and take it out downwards.
Unscrew the upper pin (A) and screw it into place on the
opposite side.
Fit the door into the upper pin (A) and close it.
Screw the hinge pin bracket (1) securely into place on
the opposite side using the screws (K).
Unscrew the handle. Refit it on the opposite side after
having pushed in the plugs with a punch. Cover the
holes left open with the plugs contained in the docu-
mentation pack.
☞
☞
☞
☞
☞
☞
☞
