10
hold waste.
Do not use if you are hypersensitive,
allergic to the cold, or if your skin suffers
from sensory disturbances, when suffer-
ing from cardiac diseases or arterial
circulatory disorders.
Preparing the appliance
• Before starting off, thoroughly clean the
epilation head you want to use (
B
or
b
).
• To remove the epilation head, press the
release buttons
3
on the left and right
and pull it off.
• Click the desired head into place:
– Choose the starter epilation head with
the white barrel head
b
if you are
epilating for the first time or if you have
very sensitive skin.
– Once your skin is used to epilation,
you may switch to the lilac standard
epilation head
B
which allows a more
efficient and faster epilation thanks to
its greater number of tweezers.
• Make sure that the EverSoft attachment
1
is in place.
• Plug the cord connector
6
into the
socket
5
and plug the transformer plug
7
into an electrical outlet.
C How to epilate
1 To turn on the appliance, slide switch
4
to setting «2»
(«2» = normal speed,
«1» = reduced speed).
2 Rub your skin to lift short hairs.
For optimal performance, hold the
appliance at a right angle (90°) against
your skin and guide it without pressure
against the hair growth, in the direction
of the switch. Both rolls of the EverSoft
attachment should always be kept in
contact with the skin, allowing the
pulsating movements to stimulate and
relax the skin for a gentler epilation.
3
Leg epilation
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.
4
Underarm and bikini line epilation
Use tests monitored by dermatolo-
gists have revealed that you can also
epilate the underarm and the bikini line.
Please be aware that these areas are
particularly sensitive to pain. With
repeated usage the pain sensation will
diminish.
Before epilating, thoroughly clean the
respective area to remove residue (like
deodorant). Then carefully dab dry with
a towel. When epilating the underarm,
keep your arm raised up and guide the
appliance in different directions.
Cleaning the epilation heads
5 After epilating, unplug the appliance
and clean the epilation head used:
First take off the EverSoft attachment
1
and brush out the rolls.
6 Thoroughly clean the tweezer element
with the cleaning brush and also with
alcohol. While cleaning, you can turn
the tweezer element manually.
To remove the epilation head, press the
release buttons
3
on the left and right
and pull it off.
7 Give the top of the housing a quick
clean with the brush. Replace the
epilation head and the EverSoft
attachment.
Subject to change without notice.
5316445_2270_6-28 Seite 10 Mittwoch, 10. Oktober 2001 3:13 15
