Bedienungsanleitung Braun 380 (Seite 7 von 41) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

369176

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

• Maximum battery capacity will only be

reached after several charging/discharging

cycles.

• If the rechargeable batteries are discharged,

you may also shave by connecting the

shaver to an electrical outlet via the special

cord set.

Charging lights

350/360

and 370 models: The green charging

light blinks when the shaver is being charged.

When the battery is fully charged, the charging

light lights permanently.

380 model: The 3 segments of the green

charging light indicate the charging level by

thirds. When fully charged, all 3 segments of the

charging light shine permanently.

Low-charge light

(380/370 models only)

The red low-charge light flashes when the

battery capacity has dropped below 20%,

provided the shaver is switched on. The re-

maining capacity will then be sufficient for 2 to

3 shaves.

Shaving

Turn on the shaver («start»):

The pivoting cutting system automatically

adjusts to every contour of your face.

Trimmer:

When the long hair trimmer is activated, it allows

the controlled trimming of moustache or

sideburns.

Cleaning

This appliance is suitable for cleaning

under an open water tap.

Warning: Detach the hand-held part

from the power supply before cleaning it in

water.

Regular cleaning ensures better shaving per-

formance. Rinsing the shaving head after each

shave under running water is an easy and fast

way to keep it clean:

• Switch the shaver on (cordless) and rinse

the shaving head under hot running water.

A natural based soap may also be used

provided it contains no particles or abrasive

substances. Rinse off all foam and let the

shaver run for a few more seconds.

• Next, switch off the shaver, remove the

shaver foil and the cutter block. Then leave

the disassembled shaving parts to dry.

• If you regularly clean the shaver under

water, then once a week apply a drop of

light machine oil onto the long hair trimmer

and shaver foil.

Alternatively, you may clean the shaver using

the brush provided:

• Switch off the shaver. Remove the shaver

foil.

• Using the brush, clean the cutter block and

the inner area of the shaver head. However,

do not clean the shaver foil with the brush as

this may damage the foil.

Tips for the perfect shave

• We recommend that you shave before

washing, as the skin tends to be slightly

swollen after washing.

• Hold the shaver at right angles (90°) to the

skin. Stretch the skin and shave against

the direction of beard growth.

• To maintain 100% shaving performance,

replace the shaver foil and cutter block,

when the replacement light (8) comes on

(after about 18 months), or when the

shaving parts are worn.

98576103_380_MN Seite 7 Donnerstag, 13. Dezember 2007 1:55 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun 380 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info