Bedienungsanleitung Braun 5040s wet-dry (Seite 10 von 70) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

514817

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

English

Our products are designed to meet the highest

standards of quality, functionality and design.

Thank you for your trust in Braun’s quality and we

hope you enjoy your new Braun shaver.

Please read the use instructions carefully and

completely before using the appliance.

Warning

Your appliance is provided with a special cord set,

which has an integrated Safety Extra Low Voltage

power supply. Do not exchange or tamper with any

part of it, otherwise there is risk of an electric shock.

Only use the special cord set provided with your

appliance.

Do not shave with a damaged foil or cord.

This appliance is not intended for use by children

or persons with reduced physical or mental

capabilities, unless they are given supervision by a

person responsible for their safety. In general, we

recommend that you keep the appliance out of

reach of children. Children should be supervised to

ensure that they do not play with the appliance.

Oil bottle

(models 5040s w&d/5030s/5020s)

Keep out of reach of children. Do not swallow. Do not

apply to eyes. Dispose of properly when empty.

Clean&Charge Station

(models 5090cc/5070cc/5050cc)

To prevent the cleaning fluid from leaking, ensure

that the Clean&Charge Station is placed on a flat

surface. When a cleaning cartridge is installed, do

not tip, move suddenly or transport the station in any

way as cleaning fluid might spill out of the cartridge.

Do not place the station inside a mirror cabinet,

nor place it on a polished or lacquered surface.

The cleaning cartridge contains a highly flammable

liquid so keep it away from sources of ignition. Do

not expose to direct sunlight and cigarette smoking

nor store it over a radiator.

Shaver

1 Foil & Cutter cassette

2 Cassette release button

3 MultiHeadLock switch

4 On/off switch

5 Shaver display

6 Long hair trimmer

7 Shaver-to-station contacts

8a Release button for long hair trimmer

8b Model number of shaver

9 Shaver power socket

10 Special cord set

11a Brush

11b Hard travel case

11c Protection cap

First use and Charging

Prior to first use remove the protection foil from the

shaver display and connect the shaver to an electrical

outlet using the special cord set (10).

Charging and basic operating information

• A full charge provides up to 45 minutes of cordless

shaving time. This may vary according to your

beard growth and environmental temperature.

• Recommended ambient temperature for charging is

5 °C to 35 °C. The battery may not charge properly

or at all under extreme low or high temperatures.

Recommended ambient temperature for storage

and shaving is 15 °C to 35 °C.

• Do not expose the appliance to temperatures

higher than 50 °C for extended periods of time.

• When the shaver will be connected to an electrical

outlet, it may take some minutes until the display

illuminates.

Shaver display

Charge status

The shaver display (5) shows the charge status of

the battery.

During charging: The battery symbol will blink.

(5090cc: The respective battery segment will blink.)

Fully charged (shaver is connected to an electrical

outlet): The battery symbol will light up for a few

seconds. (5090cc: All battery symbols will light up

for a few seconds.)

Low charge

The low-charge light

flashes red when the

battery is running low. You should be able to finish

your shave. With switching off the shaver a beep

sound reminds of the low charge status.

Cleaning status

(models 5090cc/5070cc/5050cc only)

The cleaning indicator

lights up, when the shaver

needs to be cleaned in the Clean&Charge Station.

Travel lock

The lock symbol

lights up when the shaver has

been locked to avoid unintended starting of the

motor (e.g. for storing it in a suitcase).

Using the shaver (see fig. A)

Press the on/off switch (4) to operate the shaver.

Tips for a perfect dry shave

For best results, Braun recommends you to follow

3 simple steps:

1. Always shave before washing your face.

2. At all times, hold the shaver at the right angle

(90°) to your skin.

3. Stretch your skin and shave against the direction

of your beard growth.

95785608_5090cc_MN_S6-66.indd 10 03.04.12 15:13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun 5040s wet-dry Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info