Bedienungsanleitung Braun 7681 wd silk epil7 expr pro 648055 (Seite 15 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

429042

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

using irritating substances such as deo-

dorants with alcohol.

5 Facial epilation

For removing any unwanted hair from

the face or other sensitive areas, use the

precision cap (9) as an optional attachment

to be placed on the epilation head (2).

For the first few usages, we recommend

that you select speed setting «I» in order to

get used to the epilation sensation in those

sensitive areas.

Prior to epilation, we recommend cleaning

the skin with alcohol to promote good

hygiene.

When epilating the face, stretch the skin

with one hand and slowly guide the

epilator with your other hand the direction

of the switch.

Overheating protection

As a safety feature to avoid the unlikely

event of the appliance overheating, it may

happen that the red low charge light shines

permanently for 8 seconds and then the

appliance turns off automatically. In this case,

turn the switch back to the position «0» and

let the appliance cool down.

6 Cleaning the epilation head

Regular cleaning ensures better perform-

ance.

a Brush cleaning:

Remove the cap and brush it out.

Thoroughly clean the tweezers from the

rear side of the epilator head with the

brush dipped into alcohol. While doing so,

turn the tweezer element manually. This

cleaning method ensures best hygienic

conditions for the epilation head.

b Cleaning under running water:

After each wet usage, clean the appliance

under running water.

Remove the cap. Hold the appliance with

the epilation head under hot running water.

Then press the release button (6) to remove

the epilation head.

Thoroughly shake both, the epilation

head and the appliance to make sure that

remaining water can drip out. Leave both

parts to dry. Before reattaching, make sure

that they are completely dry.

B Using the shaver head

attachment

a OptiTrim comb

b Shaver foil

c Trimmer

d Release buttons

e Trim/shave selector

f Cutter block

g Shaver head base

Shaving

• Put on the shaver head attachment (10) by

clicking it in.

• Pressing one of the lock keys, turn the

switch clockwise to setting «II».

• Make sure the trim/shave selector (e) is in

the « » position.

• Use the shaver head attachment on dry

skin only.

• For best results, always make sure that

both, the shaver foil (b) and the trimmer (c)

are in contact with the skin (A). Keeping

your skin stretched (B), slowly move the

appliance against the direction of hair

growth. The trimmer first raises all long

hairs and cuts them off. Then the flexible

foil follows to smooth away any stubble.

• When shaving or trimming in sensitive

areas, make sure that you always keep

your skin stretched to avoid injuries.

99569466_SE7681_7281_MN 1599569466_SE7681_7281_MN 15 28.09.10 12:0928.09.10 12:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun 7681 wd silk epil7 expr pro 648055 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info