Bedienungsanleitung Braun 7771 WD (Seite 15 von 74) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

454282

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

• From time to time, rinse off the foam built

up on the Smoothing cap.

B Epilation

Remove the Smoothing cap (2) and attach

the Epilation cap (11) or the cap for sensitive

areas (12). You may epilate under wet or dry

conditions:

Wet usage: To achieve best gliding

conditions, make sure the skin

is very moist.

Dry usage: Make sure your skin is dry and

free from grease and cream.

Leg epilation:

• Stretching your skin, guide the appliance

in a slow, continuous movement without

pressure against the hair growth in the

direction of the switch.

• As hair grows in different directions, it

may be helpful to guide the appliance in

different directions to achieve best results.

Epilation in sensitive areas:

• For underarm and bikini line epilation,

attach the Epilation cap (12) which has

been specifically developed for use in

sensitive areas.

• Before epilating, thoroughly clean the

respective area to remove residues (like

deodorant). Keep your arm raised up so

that the skin is stretched and guide the

appliance in different directions. As skin

may be more sensitive directly after epila-

tion, avoid using irritating substances

such as deodorants with alcohol.

• Please be aware that especially in the

beginning, these areas are particularly

sensitive to pain. Therefore, we recom-

mend that you select speed setting «I» for

the first few usages.

With repeated usage the pain sensation

will diminish. For more comfort, ensure

that the hair is at the optimum length of

2-5 mm.

Overheating protection

As a safety feature to avoid the unlikely

event of the appliance overheating, it may

happen that the red low charge light shines

permanently for 8 seconds and then the

appliance turns off automatically. In this

case, turn the switch back to the position «0»

and let the appliance cool down.

Keeping the appliance in top

shape

Cleaning with water

After each wet usage, thoroughly clean the

appliance with water to ensure optimum

performance.

Remove the Smoothing cap (2) and clean it

under warm running water.

Hold the appliance with the epilation head

under running water and briefly switch it on.

Then press the release button (10) to remove

the epilation head.

Thoroughly shake both, the epilation head

and the appliance to make sure that

remaining water can drip out. Remove the

non-slip grip and leave all parts to dry.

Before reattaching, make sure all parts are

completely dry.

After reassembling the epilation head and

the Smoothing cap (2), you may attach the

protection cap (1) to protect the blade.

Cleaning with the brush

If you have used the appliance in dry

conditions, it may be sufficient to clean it

with the brush.

99466646_SE_7891-7871_WE_S6-76.indd 1599466646_SE_7891-7871_WE_S6-76.indd 15 13.09.10 08:3413.09.10 08:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun 7771 WD Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info